sysdata.xml bład systemu

Wszystko co dotyczy systemów operacyjnych Windows, Unix, Mac OS i innych
MTZK

Użytkownik
Posty: 3
Rejestracja: 05 paź 2011, 13:11

sysdata.xml bład systemu

Post06 paź 2011, 03:37

Niestety problem nie zniknął. Może niekompletnie odinstalowałem ten sterownik, usunąłem tylko sterownik obrazu Nvidia a resztę zostawiłem.

-- 06 paź 2011, 03:37 --


Awatar użytkownika
djkamil09061991

Globalny Moderator
Posty: 8250
Rejestracja: 18 lut 2009, 11:54
Lokalizacja: Wrocław
Kontaktowanie:

sysdata.xml bład systemu

Post06 paź 2011, 12:36

Usuwasz sterownik nvidia z panelu sterownania, przeczyszczasz komputer programem np.ccleaner następnie resetujesz komputer i instalujesz inną wersję sterowników. Jeśli problem nadal występuje sprawdzaj starsze sterowniki, najnowsze nie muszą być najlepsze.

Awatar użytkownika
XMan

Globalny Moderator
Posty: 13385
Rejestracja: 30 lis 2008, 00:40

sysdata.xml bład systemu

Post06 paź 2011, 12:50

MTZK

Nie pomoże zmiana sterowników do karty graficznej tj. proponuje p/w djkamil09061991
to pozostaje :
1. sprawdzenie pamięci
http://www.hotfix.pl/instrukcja-obslugi ... m-a204.htm
/czym dłużej tym lepiej/.
sprzet-komputerowy/analiza-smart-s-m-a-r-t-dysku-twardego-t30.html
2. wrzucenie logów zgodnie z tym regulaminem
bezpieczenstwo/nowy-regulamin-dzialu-bezpiecze-stwo-t1887.html
Nie chodzi tylko o wirusy ale również o to jakie posiadasz zainstalowane programy...
Kto pyta - nie błądzi, kto szuka - znajduje.
Obrazek
Dostępne tylko dla zarejestrowanych użytkowników

arekp1

Użytkownik
Posty: 1
Rejestracja: 20 mar 2012, 12:46

sysdata.xml bład systemu

Post20 mar 2012, 13:08

Witam. Odświeżam temat;) zrobiłem jak wyrzej wymieniłem WSTWIAM LOG Z WINDBG:



Kod: Zaznacz cały

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\WINDOWS\Minidump\Mini032012-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: *** Invalid ***
****************************************************************************
* Symbol loading may be unreliable without a symbol search path.           *
* Use .symfix to have the debugger choose a symbol path.                   *
* After setting your symbol path, use .reload to refresh symbol locations. *
****************************************************************************
Executable search path is:
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
*                                                                   *
* The Symbol Path can be set by:                                    *
*   using the _NT_SYMBOL_PATH environment variable.                 *
*   using the -y <symbol_path> argument when starting the debugger. *
*   using .sympath and .sympath+                                    *
*********************************************************************
Unable to load image ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Windows XP Kernel Version 2600 (Service Pack 3) MP (4 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Machine Name:
Kernel base = 0x804d7000 PsLoadedModuleList = 0x8055d720
Debug session time: Tue Mar 20 11:23:17.250 2012 (GMT+1)
System Uptime: 0 days 19:27:05.187
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
*                                                                   *
* The Symbol Path can be set by:                                    *
*   using the _NT_SYMBOL_PATH environment variable.                 *
*   using the -y <symbol_path> argument when starting the debugger. *
*   using .sympath and .sympath+                                    *
*********************************************************************
Unable to load image ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Loading Kernel Symbols
...............................................................
.............................................................
Loading User Symbols
Loading unloaded module list
..............................
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 4E, {8f, 14e00, 6b340, 0}

***** Kernel symbols are WRONG. Please fix symbols to do analysis.

*************************************************************************
***                                                                   ***
***                                                                   ***
***    Your debugger is not using the correct symbols                 ***
***                                                                   ***
***    In order for this command to work properly, your symbol path   ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Your debugger is not using the correct symbols                 ***
***                                                                   ***
***    In order for this command to work properly, your symbol path   ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
*                                                                   *
* The Symbol Path can be set by:                                    *
*   using the _NT_SYMBOL_PATH environment variable.                 *
*   using the -y <symbol_path> argument when starting the debugger. *
*   using .sympath and .sympath+                                    *
*********************************************************************
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
*                                                                   *
* The Symbol Path can be set by:                                    *
*   using the _NT_SYMBOL_PATH environment variable.                 *
*   using the -y <symbol_path> argument when starting the debugger. *
*   using .sympath and .sympath+                                    *
*********************************************************************
Probably caused by : ntoskrnl.exe ( nt+22f43 )

Followup: MachineOwner
---------


Nie bardzo wiem o co w tym chodzi;/ Proszę o pomoc pozdrawiam;)
Ostatnio zmieniony 20 mar 2012, 15:04 przez greh, łącznie zmieniany 1 raz.
Powód: Wstawiam w code

dennisek123

Stały bywalec
Posty: 286
Rejestracja: 12 kwie 2011, 10:39
Lokalizacja: Okolice Poznania :D

sysdata.xml bład systemu

Post20 mar 2012, 13:52

Odswieżasz temat sprzed prawie pół roku ?...

Może lepiej załóż nowy temat pisząc co się dzieje, jaki masz problem w nowym temacie...

Chyba Tobie coś logi nie wyszły ^^


Zle wczytałeś symbole tutaj masz linka jak obsługiwać ten program i to zrób krok po kroku :)

http://www.hotfix.pl/bluescreen-bsod-sz ... mp-a17.htm

xev123

Użytkownik
Posty: 2
Rejestracja: 21 maja 2012, 19:06

sysdata.xml bład systemu

Post21 maja 2012, 19:21

Podobny Problem co jakiś czas reset



Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\WINDOWS\Minidump\Mini052112-05.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: *** Invalid ***
****************************************************************************
* Symbol loading may be unreliable without a symbol search path. *
* Use .symfix to have the debugger choose a symbol path. *
* After setting your symbol path, use .reload to refresh symbol locations. *
****************************************************************************
Executable search path is:
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
*********************************************************************
Unable to load image ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Windows XP Kernel Version 2600 (Service Pack 3) UP Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Machine Name:
Kernel base = 0x804d7000 PsLoadedModuleList = 0x8055b1c0
Debug session time: Mon May 21 18:54:11.640 2012 (GMT+4)
System Uptime: 0 days 0:18:27.206
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
*********************************************************************
Unable to load image ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Loading Kernel Symbols
...............................................................
..................................................
Loading User Symbols
Loading unloaded module list
.........
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000000A, {89ee718c, 2, 0, 804dbe7b}

***** Kernel symbols are WRONG. Please fix symbols to do analysis.

*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!KPRCB ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!KPRCB ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
*************************************************************************
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
*********************************************************************
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
*********************************************************************
Probably caused by : ntoskrnl.exe ( nt+4e7b )

Followup: MachineOwner
---------

Z góry dzięki

Awatar użytkownika
cosik_ktosik

Administrator
Posty: 21399
Rejestracja: 13 lis 2008, 01:17
Lokalizacja: Szczecin
Kontaktowanie:

sysdata.xml bład systemu

Post22 maja 2012, 01:03

Niestety ten DMP na nic wartościowego nie wskazuje.
Hotfix
Pozdrawiam, cosik_ktosik :)

xev123

Użytkownik
Posty: 2
Rejestracja: 21 maja 2012, 19:06

sysdata.xml bład systemu

Post23 maja 2012, 17:55

Czy coś źle zrobiłem ?

Dostępne tylko dla zarejestrowanych użytkowników

Proszę o pomoc niestety się słabo znam na tym .

-- 23 maja 2012, 17:31 --

co jakiś czas restart do tego nie da się przyzwyczai

Czy coś źle zrobiłem ?

Tak, logi oraz inne wrzucasz na zewnętrzny serwer a na forum podajesz tylko link do nich,
XMan.
Ostatnio zmieniony 23 maja 2012, 17:55 przez XMan, łącznie zmieniany 1 raz.
Powód: wrzuciłem na zewnętrzny serwer

Mirabely

Użytkownik
Posty: 2
Rejestracja: 23 sie 2013, 22:10

sysdata.xml bład systemu

Post23 sie 2013, 22:54

Mam podobny problem od pewnego czasu. Również nie jest to dla mnie czytelne.

Kod: Zaznacz cały

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\WINDOWS\Minidump\Mini082213-03.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: *** Invalid ***
****************************************************************************
* Symbol loading may be unreliable without a symbol search path.           *
* Use .symfix to have the debugger choose a symbol path.                   *
* After setting your symbol path, use .reload to refresh symbol locations. *
****************************************************************************
Executable search path is:
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
*                                                                   *
* The Symbol Path can be set by:                                    *
*   using the _NT_SYMBOL_PATH environment variable.                 *
*   using the -y <symbol_path> argument when starting the debugger. *
*   using .sympath and .sympath+                                    *
*********************************************************************
Unable to load image ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Windows XP Kernel Version 2600 (Service Pack 3) MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Machine Name:
Kernel base = 0x804d7000 PsLoadedModuleList = 0x8055d720
Debug session time: Thu Aug 22 19:30:50.812 2013 (GMT+2)
System Uptime: 0 days 2:14:49.484
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
*                                                                   *
* The Symbol Path can be set by:                                    *
*   using the _NT_SYMBOL_PATH environment variable.                 *
*   using the -y <symbol_path> argument when starting the debugger. *
*   using .sympath and .sympath+                                    *
*********************************************************************
Unable to load image ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Loading Kernel Symbols
...............................................................
...............................................................
Loading User Symbols
Loading unloaded module list
.............
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000000A, {0, 2, 1, 80522800}

***** Kernel symbols are WRONG. Please fix symbols to do analysis.

*** WARNING: Unable to verify timestamp for afd.sys
*** ERROR: Module load completed but symbols could not be loaded for afd.sys
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Your debugger is not using the correct symbols                 ***
***                                                                   ***
***    In order for this command to work properly, your symbol path   ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Your debugger is not using the correct symbols                 ***
***                                                                   ***
***    In order for this command to work properly, your symbol path   ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
*                                                                   *
* The Symbol Path can be set by:                                    *
*   using the _NT_SYMBOL_PATH environment variable.                 *
*   using the -y <symbol_path> argument when starting the debugger. *
*   using .sympath and .sympath+                                    *
*********************************************************************
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
*                                                                   *
* The Symbol Path can be set by:                                    *
*   using the _NT_SYMBOL_PATH environment variable.                 *
*   using the -y <symbol_path> argument when starting the debugger. *
*   using .sympath and .sympath+                                    *
*********************************************************************
Probably caused by : afd.sys ( afd+c196 )

Followup: MachineOwner
---------





Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\WINDOWS\Minidump\Mini082213-02.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: *** Invalid ***
****************************************************************************
* Symbol loading may be unreliable without a symbol search path.           *
* Use .symfix to have the debugger choose a symbol path.                   *
* After setting your symbol path, use .reload to refresh symbol locations. *
****************************************************************************
Executable search path is:
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
*                                                                   *
* The Symbol Path can be set by:                                    *
*   using the _NT_SYMBOL_PATH environment variable.                 *
*   using the -y <symbol_path> argument when starting the debugger. *
*   using .sympath and .sympath+                                    *
*********************************************************************
Unable to load image ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Windows XP Kernel Version 2600 (Service Pack 3) MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Machine Name:
Kernel base = 0x804d7000 PsLoadedModuleList = 0x8055d720
Debug session time: Thu Aug 22 15:15:28.562 2013 (GMT+2)
System Uptime: 0 days 0:10:42.241
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
*                                                                   *
* The Symbol Path can be set by:                                    *
*   using the _NT_SYMBOL_PATH environment variable.                 *
*   using the -y <symbol_path> argument when starting the debugger. *
*   using .sympath and .sympath+                                    *
*********************************************************************
Unable to load image ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Loading Kernel Symbols
...............................................................
...............................................................
Loading User Symbols
Loading unloaded module list
............
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000008E, {c0000005, 804f4e08, a61fbbb0, 0}

***** Kernel symbols are WRONG. Please fix symbols to do analysis.

*************************************************************************
***                                                                   ***
***                                                                   ***
***    Your debugger is not using the correct symbols                 ***
***                                                                   ***
***    In order for this command to work properly, your symbol path   ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Your debugger is not using the correct symbols                 ***
***                                                                   ***
***    In order for this command to work properly, your symbol path   ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
*                                                                   *
* The Symbol Path can be set by:                                    *
*   using the _NT_SYMBOL_PATH environment variable.                 *
*   using the -y <symbol_path> argument when starting the debugger. *
*   using .sympath and .sympath+                                    *
*********************************************************************
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
*                                                                   *
* The Symbol Path can be set by:                                    *
*   using the _NT_SYMBOL_PATH environment variable.                 *
*   using the -y <symbol_path> argument when starting the debugger. *
*   using .sympath and .sympath+                                    *
*********************************************************************
Probably caused by : hardware ( nt+1de08 )

Followup: MachineOwner
---------




Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\WINDOWS\Minidump\Mini082213-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: *** Invalid ***
****************************************************************************
* Symbol loading may be unreliable without a symbol search path.           *
* Use .symfix to have the debugger choose a symbol path.                   *
* After setting your symbol path, use .reload to refresh symbol locations. *
****************************************************************************
Executable search path is:
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
*                                                                   *
* The Symbol Path can be set by:                                    *
*   using the _NT_SYMBOL_PATH environment variable.                 *
*   using the -y <symbol_path> argument when starting the debugger. *
*   using .sympath and .sympath+                                    *
*********************************************************************
Unable to load image ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Windows XP Kernel Version 2600 (Service Pack 3) MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Machine Name:
Kernel base = 0x804d7000 PsLoadedModuleList = 0x8055d720
Debug session time: Thu Aug 22 15:04:25.343 2013 (GMT+2)
System Uptime: 0 days 0:58:29.901
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
*                                                                   *
* The Symbol Path can be set by:                                    *
*   using the _NT_SYMBOL_PATH environment variable.                 *
*   using the -y <symbol_path> argument when starting the debugger. *
*   using .sympath and .sympath+                                    *
*********************************************************************
Unable to load image ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Loading Kernel Symbols
...............................................................
...............................................................
Loading User Symbols
Loading unloaded module list
.............
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000008E, {c0000005, 804f4e08, a5548bb0, 0}

***** Kernel symbols are WRONG. Please fix symbols to do analysis.

*************************************************************************
***                                                                   ***
***                                                                   ***
***    Your debugger is not using the correct symbols                 ***
***                                                                   ***
***    In order for this command to work properly, your symbol path   ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*************************************************************************
***                                                                   ***
***                                                                   ***
***    Your debugger is not using the correct symbols                 ***
***                                                                   ***
***    In order for this command to work properly, your symbol path   ***
***    must point to .pdb files that have full type information.      ***
***                                                                   ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information.  Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.                                                          ***
***                                                                   ***
***    Type referenced: nt!_KPRCB                                     ***
***                                                                   ***
*************************************************************************
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
*                                                                   *
* The Symbol Path can be set by:                                    *
*   using the _NT_SYMBOL_PATH environment variable.                 *
*   using the -y <symbol_path> argument when starting the debugger. *
*   using .sympath and .sympath+                                    *
*********************************************************************
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
*                                                                   *
* The Symbol Path can be set by:                                    *
*   using the _NT_SYMBOL_PATH environment variable.                 *
*   using the -y <symbol_path> argument when starting the debugger. *
*   using .sympath and .sympath+                                    *
*********************************************************************
Probably caused by : hardware ( nt+1de08 )

Followup: MachineOwner
---------



Z góry dzięki ;)

Awatar użytkownika
djkamil09061991

Globalny Moderator
Posty: 8250
Rejestracja: 18 lut 2009, 11:54
Lokalizacja: Wrocław
Kontaktowanie:

sysdata.xml bład systemu

Post23 sie 2013, 23:24

Mirabely masz może jeszcze inne raporty? jeśli tak to podaj.

Mirabely

Użytkownik
Posty: 2
Rejestracja: 23 sie 2013, 22:10

sysdata.xml bład systemu

Post24 sie 2013, 00:56

Nie mam, tylko 3.

damianw55

Użytkownik
Posty: 1
Rejestracja: 19 sty 2014, 15:45

sysdata.xml bład systemu

Post19 sty 2014, 15:48

Oto mój problem. Myśle iż mi w tym pomożecie.

Kod: Zaznacz cały

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\WINDOWS\Minidump\Mini123113-02.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows XP Kernel Version 2600 (Service Pack 3) UP Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 2600.xpsp_sp3_qfe.130704-0421
Machine Name:
Kernel base = 0x804d7000 PsLoadedModuleList = 0x805541c0
Debug session time: Tue Dec 31 20:43:47.562 2013 (GMT+1)
System Uptime: 0 days 7:43:02.137
Loading Kernel Symbols
...............................................................
.............................................................
Loading User Symbols
Loading unloaded module list
...............
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 19, {20, 86beaa90, 86beaab0, a040006}

Probably caused by : ntkrnlpa.exe ( nt!ExFreePoolWithTag+2a0 )

Followup: MachineOwner
---------

kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

BAD_POOL_HEADER (19)
The pool is already corrupt at the time of the current request.
This may or may not be due to the caller.
The internal pool links must be walked to figure out a possible cause of
the problem, and then special pool applied to the suspect tags or the driver
verifier to a suspect driver.
Arguments:
Arg1: 00000020, a pool block header size is corrupt.
Arg2: 86beaa90, The pool entry we were looking for within the page.
Arg3: 86beaab0, The next pool entry.
Arg4: 0a040006, (reserved)

Debugging Details:
------------------


BUGCHECK_STR:  0x19_20

POOL_ADDRESS:  86beaa90

CUSTOMER_CRASH_COUNT:  2

DEFAULT_BUCKET_ID:  DRIVER_FAULT

PROCESS_NAME:  System

LAST_CONTROL_TRANSFER:  from 80544c86 to 804f8cdb

STACK_TEXT: 
f7983a34 80544c86 00000019 00000020 86beaa90 nt!KeBugCheckEx+0x1b
f7983a84 80532398 86beaa98 00000000 00000000 nt!ExFreePoolWithTag+0x2a0
f7983a9c f72626af 86e39c90 f7983af8 f7983ad0 nt!ExDeleteResourceLite+0x40
f7983aac f729b242 86e39c90 8701c260 e2cd5d20 Ntfs!NtfsFreeEresource+0x6b
f7983ad0 f7262587 868e94d8 f7983af8 f7983b03 Ntfs!NtfsDeleteFcb+0x4e
f7983b1c f7283e7c 868e94d8 8701c100 e16a1008 Ntfs!NtfsTeardownFromLcb+0x1fd
f7983b74 f725e7a4 868e94d8 e16a10d0 e16a1268 Ntfs!NtfsTeardownStructures+0x125
f7983ba0 f72816b5 868e94d8 016a10d0 e16a1268 Ntfs!NtfsDecrementCloseCounts+0x9e
f7983c24 f7281454 868e94d8 e16a10d0 e16a1008 Ntfs!NtfsCommonClose+0x398
f7983cc4 804ee199 8701c020 8690cc80 87057cc8 Ntfs!NtfsFsdClose+0x21f
f7983cd4 f7313459 f7983d24 804ee199 8701fdd0 nt!IopfCallDriver+0x31
f7983cdc 804ee199 8701fdd0 8690cc80 8690cc80 sr!SrPassThrough+0x31
f7983cec 805790f6 868fea50 00000000 00000000 nt!IopfCallDriver+0x31
f7983d24 805b0cf4 008fea68 868fea50 00000000 nt!IopDeleteFile+0x132
f7983d40 80522cb5 868fea68 00000000 00000000 nt!ObpRemoveObjectRoutine+0xe0
f7983d64 80507f70 80558854 86fa6c18 00000000 nt!ObfDereferenceObject+0x5f
f7983d8c 80509722 e3291698 00000000 871bf020 nt!MiSegmentDelete+0xdc
f7983dac 805c63dc 00000000 00000000 00000000 nt!MiDereferenceSegmentThread+0x9e
f7983ddc 80541f62 80509684 00000000 00000000 nt!PspSystemThreadStartup+0x34
00000000 00000000 00000000 00000000 00000000 nt!KiThreadStartup+0x16


STACK_COMMAND:  kb

FOLLOWUP_IP:
nt!ExFreePoolWithTag+2a0
80544c86 8b45f8          mov     eax,dword ptr [ebp-8]

SYMBOL_STACK_INDEX:  1

SYMBOL_NAME:  nt!ExFreePoolWithTag+2a0

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nt

IMAGE_NAME:  ntkrnlpa.exe

DEBUG_FLR_IMAGE_TIMESTAMP:  51d4d90e

FAILURE_BUCKET_ID:  0x19_20_nt!ExFreePoolWithTag+2a0

BUCKET_ID:  0x19_20_nt!ExFreePoolWithTag+2a0

Followup: MachineOwner
---------

Awatar użytkownika
cosik_ktosik

Administrator
Posty: 21399
Rejestracja: 13 lis 2008, 01:17
Lokalizacja: Szczecin
Kontaktowanie:

sysdata.xml bład systemu

Post21 sty 2014, 23:51

Witam ponownie, podaj proszę:
1. Podaj odczyt danych SMART dysku z programu HD Tune, zakładka Health => instrukcja odczytu SMART.


2. Sprawdź pamięć programem Instrukcja obsługi programu Memtest86+ - Sprawdzanie pamięci RAM
Hotfix
Pozdrawiam, cosik_ktosik :)



  • Reklama

Wróć do „Systemy operacyjne”



Kto jest online

Użytkownicy przeglądający to forum: Obecnie na forum nie ma żadnego zarejestrowanego użytkownika i 6 gości