Z płyty bootowalnej Ultimate Boot CD 
pr.GSmartControl zrobiłem test dysku.
Proszę o ocenę dysku .
Mam Windows 7 64bit  i problem polega na tym ,że system uruchamia się około 30 minut.
Pomyślałem ,że powodem może być dysk.
smartctl 5.39.1 2010-01-28 r3054 [i486-slackware-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, 
=== START OF INFORMATION SECTION ===
Model Family:     
Western Digital Caviar Green family
Device Model:     WDC WD10EADS-00P8B0
Serial 
Number:    WD-WMAVU0232818
Firmware Version: 01.00A01
User Capacity:    1,000,204,886,016 bytes
Device is:        
In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    
Fri Oct 11 12:47:05 2013 UTC
SMART support is: Available - device has SMART capability.
SMART support is: 
Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: 
PASSED
General SMART Values:
Offline data collection status:  (0x84)	Offline data collection activity
					
was suspended by an interrupting command from host.
					Auto Offline Data Collection: 
Enabled.
Self-test execution status:(   0)The previous self-test routine completed					
without error or no self-test has ever been run.Total time to complete 
Offline 
data collection:  (23880) seconds
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.					
Auto Offline data collection on/off support.Suspend Offline collection upon new	command.					
Offline surface scan supported.
Self-test supported.			
Conveyance Self-test supported.					
Selective Self-test supported.
SMART capabilities:(0x0003)	
Saves SMART data before entering					
power-saving mode.			
Supports SMART auto save timer.
Error logging capability:(0x01)	Error logging supported.					
General Purpose Logging supported.
Short self-test routine recommended polling time:(   2) minutes.
Extended self-test routine
recommended polling time:( 255) minutes.
Conveyance self-test routine
recommended polling time:(   5) minutes.
SCT capabilities:(0x303f)	
SCT Status supported.					
SCT Feature Control supported.					
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16Vendor Specific 
SMART Attributes with Thresholds:ID# ATTRIBUTE_NAME          
FLAG VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE 
  
  1 Raw_Read_Error_Rate     0x002f   123   100   051    Pre-fail  Always       -       2560452 
  3 Spin_Up_Time            0x0027   176   169   021    Pre-fail  Always       -       6200
  4 Start_Stop_Count        0x0032   099   099   000    Old_age   Always       -       1601  
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0  
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0  
  9 Power_On_Hours          0x0032   095   095   000    Old_age   Always       -       4330 
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0 
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0 
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1449
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       594
193 Load_Cycle_Count        0x0032   198   198   000    Old_age   Always       -       7403
194 Temperature_Celsius     0x0022   120   107   000    Old_age   Always       -       30
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       1067
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0
SMART Error Log Version: 1No Errors Logged
SMART Self-test log structure revision number 1No self-tests have been logged.  
[To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1 SPAN  MIN_LBA  
MAX_LBA  CURRENT_TEST_STATUS    1        0        0  
Not_testing                     2        0        0  
Not_testing                     3        0        0  
Not_testing                     4        0        0  
Not_testing                     5        0        0  
Not_testing
Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk.If 
Selective self-test is pending on power-up, resume after 0 minute delay.
			
									
									
						Analiza dysku twardego
- cosik_ktosik
 
- Posty: 21417
 - Rejestracja: 13 lis 2008, 01:17
 - Lokalizacja: Szczecin
 - Kontaktowanie:
 
Analiza dysku twardego
Witam
To błędy komunikacji, a zatem kabelek danych od dysku powinien zostać tutaj na samym początku wymieniony.
			
									
									
						199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 1067
To błędy komunikacji, a zatem kabelek danych od dysku powinien zostać tutaj na samym początku wymieniony.
- 
				
- Reklama
 
 
Kto jest online
Użytkownicy przeglądający to forum: Obecnie na forum nie ma żadnego zarejestrowanego użytkownika i 10 gości

