HD Tune: WDC WD1600AAJS-75PSA Health
Kod: Zaznacz cały
ID Current Worst ThresholdData Status
(01) Raw Read Error Rate 200 200 51 0 Ok
(03) Spin Up Time 158 157 21 3066 Ok
(04) Start/Stop Count 100 100 0 241 Ok
(05) Reallocated Sector Count 200 200 140 0 Ok
(07) Seek Error Rate 200 200 51 0 Ok
(09) Power On Hours Count 55 55 0 33087 Ok
(0A) Spin Retry Count 100 100 51 0 Ok
(0B) Calibration Retry Count 100 100 51 0 Ok
(0C) Power Cycle Count 100 100 0 238 Ok
(C0) Power Off Retract Count 200 200 0 100 Ok
(C1) Load Cycle Count 200 200 0 241 Ok
(C2) Temperature 107 99 0 36 Ok
(C4) Reallocated Event Count 200 200 0 0 Ok
(C5) Current Pending Sector 176 176 0 640 Ok
(C6) Offline Uncorrectable 200 200 0 0 Ok
(C7) Ultra DMA CRC Error Count 200 200 0 0 Ok
(C8) Write Error Rate 183 183 51 1126 Ok
Power On Time : 33087
Health Status : Ok
---------------------------------------------------------------------------Jeszcze poniżej wynik potraktowania dysku programem GSmartControl:
Kod: Zaznacz cały
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Blue Serial ATA
Device Model: WDC WD1600AAJS-75PSA0
Serial Number: WD-WMAP99364353
LU WWN Device Id: 5 0014ee 0004b8fd2
Firmware Version: 05.06H05
User Capacity: 160 000 000 000 bytes [160 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Wed Apr 25 15:12:30 2012
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 4260) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 57) minutes.
Conveyance self-test routine
recommended polling time: ( 6) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0003 158 157 021 Pre-fail Always - 3066
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 241
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x000e 200 200 051 Old_age Always - 0
9 Power_On_Hours 0x0032 055 055 000 Old_age Always - 33087
10 Spin_Retry_Count 0x0012 100 100 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0012 100 100 051 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 238
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 100
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 241
194 Temperature_Celsius 0x0022 107 099 000 Old_age Always - 36
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 176 176 000 Old_age Always - 640
198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 183 183 051 Old_age Offline - 1126
SMART Error Log Version: 1
ATA Error Count: 1063 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1063 occurred at disk power-on lifetime: 33085 hours (1378 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 df 05 81 e0 Error: UNC 1 sectors at LBA = 0x008105df = 8455647
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 d0 01 df 05 81 0c 00 00:45:51.282 READ DMA EXT
25 d0 01 00 00 00 00 00 00:45:51.282 READ DMA EXT
25 d0 01 de 05 81 0c 00 00:45:51.263 READ DMA EXT
25 d0 01 00 00 00 00 00 00:45:51.263 READ DMA EXT
25 d0 01 dd 05 81 0c 00 00:45:49.044 READ DMA EXT
Error 1062 occurred at disk power-on lifetime: 33085 hours (1378 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 dd 05 81 e0 Error: UNC 1 sectors at LBA = 0x008105dd = 8455645
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 d0 01 dd 05 81 0c 00 00:45:49.044 READ DMA EXT
25 d0 01 dc 05 81 0c 00 00:45:47.762 READ DMA EXT
25 d0 01 00 00 00 00 00 00:45:47.762 READ DMA EXT
25 d0 01 db 05 81 0c 00 00:45:47.299 READ DMA EXT
25 d0 01 00 00 00 00 00 00:45:47.299 READ DMA EXT
Error 1061 occurred at disk power-on lifetime: 33085 hours (1378 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 da 05 81 e0 Error: UNC 1 sectors at LBA = 0x008105da = 8455642
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 d0 01 da 05 81 0c 00 00:45:45.214 READ DMA EXT
25 d0 01 00 00 00 00 00 00:45:45.214 READ DMA EXT
25 d0 01 d9 05 81 0c 00 00:45:45.193 READ DMA EXT
25 d0 01 d8 05 81 0c 00 00:45:43.241 READ DMA EXT
25 d0 01 d7 05 81 0c 00 00:45:43.207 READ DMA EXT
Error 1060 occurred at disk power-on lifetime: 33085 hours (1378 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 d8 05 81 e0 Error: UNC 1 sectors at LBA = 0x008105d8 = 8455640
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 d0 01 d8 05 81 0c 00 00:45:43.241 READ DMA EXT
25 d0 01 d7 05 81 0c 00 00:45:43.207 READ DMA EXT
25 d0 01 d6 05 81 0c 00 00:45:43.200 READ DMA EXT
25 d0 01 00 00 00 00 00 00:45:43.200 READ DMA EXT
25 d0 01 d5 05 81 0c 00 00:45:41.659 READ DMA EXT
Error 1059 occurred at disk power-on lifetime: 33085 hours (1378 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 d3 05 81 e0 Error: UNC 1 sectors at LBA = 0x008105d3 = 8455635
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 d0 01 d3 05 81 0c 00 00:45:39.554 READ DMA EXT
25 d0 01 d2 05 81 0c 00 00:45:39.273 READ DMA EXT
25 d0 01 d1 05 81 0c 00 00:45:39.273 READ DMA EXT
25 d0 01 d0 05 81 0c 00 00:45:39.272 READ DMA EXT
25 d0 01 cf 05 81 0c 00 00:45:39.272 READ DMA EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 90% 33087 209741696
# 2 Short offline Completed: read failure 90% 33084 209741696
# 3 Short offline Completed: read failure 90% 33035 209746461
# 4 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
