Analiza SMART (S.M.A.R.T) dysku twardego.

Wszystkie sprawy związane z samym sprzętem komputerowym
maniek1

Użytkownik
Posty: 2
Rejestracja: 17 gru 2015, 20:42

Analiza SMART (S.M.A.R.T) dysku twardego.

Post17 gru 2015, 20:45

Witam.
Przy włączaniu komputera wyskakuje błąd 0xc0000185

Niepokoją mnie trochę wyniki testu S.M.A.R.T:

Kod: Zaznacz cały

smartctl 6.4 2015-06-04 r4109 [x86_64-linux-4.2.6-pmagic64] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Blue Mobile
Device Model:     WDC WD10JPCX-24UE4T0
Serial Number:    WD-WXM1E14KMWA6
LU WWN Device Id: 5 0014ee 6af8f7b44
Firmware Version: 01.01A01
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Thu Dec 17 20:08:18 2015 CST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)   Offline data collection activity
               was never started.
               Auto Offline Data Collection: Disabled.
Self-test execution status:      ( 121)   The previous self-test completed having
               the read element of the test failed.
Total time to complete Offline
data collection:       (17760) seconds.
Offline data collection
capabilities:           (0x7b) SMART execute Offline immediate.
               Auto Offline data collection on/off support.
               Suspend Offline collection upon new
               command.
               Offline surface scan supported.
               Self-test supported.
               Conveyance Self-test supported.
               Selective Self-test supported.
SMART capabilities:            (0x0003)   Saves SMART data before entering
               power-saving mode.
               Supports SMART auto save timer.
Error logging capability:        (0x01)   Error logging supported.
               General Purpose Logging supported.
Short self-test routine
recommended polling time:     (   2) minutes.
Extended self-test routine
recommended polling time:     ( 199) minutes.
Conveyance self-test routine
recommended polling time:     (   5) minutes.
SCT capabilities:           (0x7035)   SCT Status supported.
               SCT Feature Control supported.
               SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       128
  3 Spin_Up_Time            0x0027   185   181   021    Pre-fail  Always       -       1741
  4 Start_Stop_Count        0x0032   099   099   000    Old_age   Always       -       1722
  5 Reallocated_Sector_Ct   0x0033   197   197   140    Pre-fail  Always       -       139
  7 Seek_Error_Rate         0x002f   161   159   051    Pre-fail  Always       -       1360
  9 Power_On_Hours          0x0032   096   096   000    Old_age   Always       -       3512
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       815
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       103
193 Load_Cycle_Count        0x0032   194   194   000    Old_age   Always       -       20505
194 Temperature_Celsius     0x0022   120   102   000    Old_age   Always       -       27
196 Reallocated_Event_Count 0x0032   061   061   000    Old_age   Always       -       139
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       9
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0
240 Head_Flying_Hours       0x0032   096   096   000    Old_age   Always       -       3472

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed: read failure       90%      3512         944668
# 2  Short offline       Completed: read failure       90%      3512         944668
# 3  Vendor (0x50)       Completed without error       00%      2002         -
# 4  Short offline       Completed without error       00%      2002         -
# 5  Vendor (0x50)       Completed without error       00%      2001         -
# 6  Short offline       Completed without error       00%      2001         -
# 7  Vendor (0x50)       Completed without error       00%      1469         -
# 8  Short offline       Completed without error       00%      1469         -
# 9  Vendor (0x50)       Completed without error       00%        89         -
#10  Short offline       Completed without error       00%        89         -
#11  Vendor (0x50)       Completed without error       00%         8         -
#12  Short offline       Completed without error       00%         7         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


Bardzo proszę o analizę

Awatar użytkownika
KrólHDD

Globalny Moderator
Posty: 677
Rejestracja: 24 sty 2014, 14:41
Lokalizacja: Twardogóra
Kontaktowanie:

Analiza SMART (S.M.A.R.T) dysku twardego.

Post18 gru 2015, 00:05

Maniek1, Dysk złom, 05, 07 01, C5, C4.
Z dyskiem jestem w stanie zrobić prawie wszystko, Król HDD.

W sprawach Dyskowych pisać na GG: 68554272 (prawie zawsze dostępny), a także możecie pisać na mój staruszki numerek 5079748(Prawie zawsze dostępny)

Gdyby ktoś miał ochotę wspomóc, Zapraszam!

maniek1

Użytkownik
Posty: 2
Rejestracja: 17 gru 2015, 20:42

Analiza SMART (S.M.A.R.T) dysku twardego.

Post18 gru 2015, 21:05

Tego się obawiałem. Dzięki za szybką odpowiedź.

nitryloimina

Użytkownik
Posty: 4
Rejestracja: 19 gru 2015, 12:26

Analiza SMART (S.M.A.R.T) dysku twardego.

Post19 gru 2015, 14:41

Witam. Mam pewien problem z komputerem. Od jakiegoś czasu strasznie się zawiesza, nie da się wykonywać najprostszych czynności, bo wszystko trwa niewyobrażalnie długo. Podejrzewam że to dysk twardy. Reinstalacja systemu i format dysku nic nie dały. Poniżej wysyłam dane z CrystalDiskInfo i HDDTune. Bardzo proszę o analizę.
Dostępne tylko dla zarejestrowanych użytkowników
Dostępne tylko dla zarejestrowanych użytkowników
Dostępne tylko dla zarejestrowanych użytkowników
Dostępne tylko dla zarejestrowanych użytkowników

Awatar użytkownika
djkamil09061991

Globalny Moderator
Posty: 8250
Rejestracja: 18 lut 2009, 11:54
Lokalizacja: Wrocław
Kontaktowanie:

Analiza SMART (S.M.A.R.T) dysku twardego.

Post19 gru 2015, 15:01

Tutaj ja bym zrobił zerowanie w mhdd i potem remapowanie .

nitryloimina

Użytkownik
Posty: 4
Rejestracja: 19 gru 2015, 12:26

Analiza SMART (S.M.A.R.T) dysku twardego.

Post19 gru 2015, 15:13

Dziękuję za pomoc.

Awatar użytkownika
XMan

Globalny Moderator
Posty: 13385
Rejestracja: 30 lis 2008, 00:40

Analiza SMART (S.M.A.R.T) dysku twardego.

Post19 gru 2015, 15:34

@ nitryloimina

Masz tylko jeden Error Scan.
Zerowanie wiąże się z utratą danych :(
Wcześniej musisz je zapisać.
Proponuję najpierw sprawdzić mój powyższy post.
Wystarczył remap za pomocą programu MHDD.
Kto pyta - nie błądzi, kto szuka - znajduje.
Obrazek
Dostępne tylko dla zarejestrowanych użytkowników

nitryloimina

Użytkownik
Posty: 4
Rejestracja: 19 gru 2015, 12:26

Analiza SMART (S.M.A.R.T) dysku twardego.

Post19 gru 2015, 15:57

Wszystkie dane mam już zapisane na wypadek takich niespodzianek. Faktycznie, spróbuję najpierw wykonać remap w MHDD. Może to coś da. Dzięki za szybką poradę :)

-- 19 gru 2015, 15:57 --

Mam teraz kolejne pytanie. Co zrobić jeśli MHDD nie widzi mi dysku?

Awatar użytkownika
djkamil09061991

Globalny Moderator
Posty: 8250
Rejestracja: 18 lut 2009, 11:54
Lokalizacja: Wrocław
Kontaktowanie:

Analiza SMART (S.M.A.R.T) dysku twardego.

Post19 gru 2015, 16:37

Wejdź do BIOSu i przełącz tryb kontrolera SATA z AHCI na IDE

nitryloimina

Użytkownik
Posty: 4
Rejestracja: 19 gru 2015, 12:26

Analiza SMART (S.M.A.R.T) dysku twardego.

Post19 gru 2015, 20:06

Jeszcze raz ja. Po remapowaniu parametr c5 jest w porządku, ale liczba sektorów nienaprawionych c6 się nie zmieniła. Czy w takim wypadku należałoby ten dysk wyzerować czy zostawić w spokoju i poczekać na dalszy rozwój wypadków?
Dostępne tylko dla zarejestrowanych użytkowników

milczar15_94

Użytkownik
Posty: 1
Rejestracja: 21 gru 2015, 11:04

Analiza SMART (S.M.A.R.T) dysku twardego.

Post21 gru 2015, 11:23

Witam,
Ponizej analiza mojego dysku twardego. Laptop mi ostatnio upadl i teraz strasznie wolno dziala, praktycznie nic sie nie da zrobic. Prosilbym o diagnoze dysku.

smartctl 6.0 2012-10-10 r3643 [x86_64-linux-3.7.9-pmagic64] (local build)
Copyright (C) 2002-12, Bruce Allen, Christian Franke, Dostępne tylko dla zarejestrowanych użytkowników

=== START OF INFORMATION SECTION ===
Device Model: HGST HTS545050A7E680
Serial Number: TE8531L50SHNRK
LU WWN Device Id: 5 000cca 6fccaaf5a
Firmware Version: GG2OAE00
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Dec 21 08:48:58 2015 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 45) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 123) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 082 082 062 Pre-fail Always - 21758161
2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 253 253 033 Pre-fail Always - 1
4 Start_Stop_Count 0x0012 098 098 000 Old_age Always - 4190
5 Reallocated_Sector_Ct 0x0033 017 017 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0
9 Power_On_Hours 0x0012 093 093 000 Old_age Always - 3162
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 3064
191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 57
193 Load_Cycle_Count 0x0012 093 093 000 Old_age Always - 72153
194 Temperature_Celsius 0x0002 136 136 000 Old_age Always - 44 (Min/Max 13/49)
196 Reallocated_Event_Count 0x0032 001 001 000 Old_age Always - 3833
197 Current_Pending_Sector 0x0022 084 084 000 Old_age Always - 600
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
223 Load_Retry_Count 0x000a 100 100 000 Old_age Always - 0

SMART Error Log Version: 1
ATA Error Count: 2185 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 2185 occurred at disk power-on lifetime: 3162 hours (131 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 a8 4f b8 0a Error: UNC at LBA = 0x0ab84fa8 = 179851176

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 00 a8 4f b8 40 00 00:47:16.427 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 00:47:16.426 SET FEATURES [Reserved for Serial ATA]
27 00 00 00 00 00 e0 00 00:47:16.426 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 00:47:16.423 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:47:16.423 SET FEATURES [Set transfer mode]

Error 2184 occurred at disk power-on lifetime: 3162 hours (131 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 ac 4f b8 0a Error: UNC at LBA = 0x0ab84fac = 179851180

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 01 00 ac 4f b8 40 00 00:47:12.993 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 00:47:12.993 SET FEATURES [Reserved for Serial ATA]
27 00 00 00 00 00 e0 00 00:47:12.993 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 00:47:12.990 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:47:12.990 SET FEATURES [Set transfer mode]

Error 2183 occurred at disk power-on lifetime: 3162 hours (131 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 ab 4f b8 0a Error: UNC at LBA = 0x0ab84fab = 179851179

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 01 08 ac 4f b8 40 00 00:47:09.560 READ FPDMA QUEUED
60 01 00 ab 4f b8 40 00 00:47:09.560 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 00:47:09.560 SET FEATURES [Reserved for Serial ATA]
27 00 00 00 00 00 e0 00 00:47:09.560 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 00:47:09.557 IDENTIFY DEVICE

Error 2182 occurred at disk power-on lifetime: 3162 hours (131 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 ad 4f b8 0a Error: UNC at LBA = 0x0ab84fad = 179851181

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 01 10 ab 4f b8 40 00 00:47:06.126 READ FPDMA QUEUED
60 01 08 ac 4f b8 40 00 00:47:06.126 READ FPDMA QUEUED
60 01 00 ad 4f b8 40 00 00:47:06.126 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 00:47:06.125 SET FEATURES [Reserved for Serial ATA]
27 00 00 00 00 00 e0 00 00:47:06.125 READ NATIVE MAX ADDRESS EXT

Error 2181 occurred at disk power-on lifetime: 3162 hours (131 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 aa 4f b8 0a Error: UNC at LBA = 0x0ab84faa = 179851178

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 01 18 ad 4f b8 40 00 00:47:02.693 READ FPDMA QUEUED
60 01 10 ac 4f b8 40 00 00:47:02.693 READ FPDMA QUEUED
60 01 08 ab 4f b8 40 00 00:47:02.693 READ FPDMA QUEUED
60 01 00 aa 4f b8 40 00 00:47:02.693 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 00:47:02.693 SET FEATURES [Reserved for Serial ATA]

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 90% 3162 742047976
# 2 Extended offline Completed: read failure 90% 3162 916410064
# 3 Extended offline Completed: read failure 90% 3162 943313616
# 4 Short offline Completed: read failure 90% 3161 949136216

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

szymon189

Użytkownik
Posty: 90
Rejestracja: 02 maja 2011, 19:40

Analiza SMART (S.M.A.R.T) dysku twardego.

Post23 gru 2015, 16:46

Dysk z laptopa:
Obrazek

Obrazek

Obrazek

Awatar użytkownika
djarta

Globalny Moderator
Posty: 5854
Rejestracja: 26 gru 2008, 17:15
Lokalizacja: Białystok
Kontaktowanie:

Analiza SMART (S.M.A.R.T) dysku twardego.

Post23 gru 2015, 19:12

@nitryloimina - C6 nie naprawisz takimi programami, wartość będzie i jej nie usuniesz.
Były 3 bady logiczne - przeszły do puli zapasowych i jest OK.


@milczar15_94 - zrób skan powierzchnii w MHDD. Daj też SMART z tego programu.


@szymon189 - dysk zdrowy, ma wolne sektory ale to nic strasznego. Możesz mu zrobić zerowanie o ile nie masz niczego do backupu na dysku.

Awatar użytkownika
KrólHDD

Globalny Moderator
Posty: 677
Rejestracja: 24 sty 2014, 14:41
Lokalizacja: Twardogóra
Kontaktowanie:

Analiza SMART (S.M.A.R.T) dysku twardego.

Post23 gru 2015, 20:08

nitryloimina pisze:Jeszcze raz ja. Po remapowaniu parametr c5 jest w porządku, ale liczba sektorów nienaprawionych c6 się nie zmieniła. Czy w takim wypadku należałoby ten dysk wyzerować czy zostawić w spokoju i poczekać na dalszy rozwój wypadków?
Dostępne tylko dla zarejestrowanych użytkowników
Przyjacielu, C5 wyzerujesz, ale C6 już zostanie, Można wyzerować SMART, ale potrzeba do tego przynajmniej odrobinę wiedzy i stosowne narzędzia.
milczar15_94 pisze:Witam,
Ponizej analiza mojego dysku twardego. Laptop mi ostatnio upadl i teraz strasznie wolno dziala, praktycznie nic sie nie da zrobic. Prosilbym o diagnoze dysku.

smartctl 6.0 2012-10-10 r3643 [x86_64-linux-3.7.9-pmagic64] (local build)
Copyright (C) 2002-12, Bruce Allen, Christian Franke, Dostępne tylko dla zarejestrowanych użytkowników

=== START OF INFORMATION SECTION ===
Device Model: HGST HTS545050A7E680
Serial Number: TE8531L50SHNRK
LU WWN Device Id: 5 000cca 6fccaaf5a
Firmware Version: GG2OAE00
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Dec 21 08:48:58 2015 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 45) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 123) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 082 082 062 Pre-fail Always - 21758161
2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 253 253 033 Pre-fail Always - 1
4 Start_Stop_Count 0x0012 098 098 000 Old_age Always - 4190
5 Reallocated_Sector_Ct 0x0033 017 017 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0
9 Power_On_Hours 0x0012 093 093 000 Old_age Always - 3162
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 3064
191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 57
193 Load_Cycle_Count 0x0012 093 093 000 Old_age Always - 72153
194 Temperature_Celsius 0x0002 136 136 000 Old_age Always - 44 (Min/Max 13/49)
196 Reallocated_Event_Count 0x0032 001 001 000 Old_age Always - 3833
197 Current_Pending_Sector 0x0022 084 084 000 Old_age Always - 600
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
223 Load_Retry_Count 0x000a 100 100 000 Old_age Always - 0

SMART Error Log Version: 1
ATA Error Count: 2185 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 2185 occurred at disk power-on lifetime: 3162 hours (131 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 a8 4f b8 0a Error: UNC at LBA = 0x0ab84fa8 = 179851176

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 00 a8 4f b8 40 00 00:47:16.427 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 00:47:16.426 SET FEATURES [Reserved for Serial ATA]
27 00 00 00 00 00 e0 00 00:47:16.426 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 00:47:16.423 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:47:16.423 SET FEATURES [Set transfer mode]

Error 2184 occurred at disk power-on lifetime: 3162 hours (131 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 ac 4f b8 0a Error: UNC at LBA = 0x0ab84fac = 179851180

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 01 00 ac 4f b8 40 00 00:47:12.993 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 00:47:12.993 SET FEATURES [Reserved for Serial ATA]
27 00 00 00 00 00 e0 00 00:47:12.993 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 00:47:12.990 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:47:12.990 SET FEATURES [Set transfer mode]

Error 2183 occurred at disk power-on lifetime: 3162 hours (131 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 ab 4f b8 0a Error: UNC at LBA = 0x0ab84fab = 179851179

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 01 08 ac 4f b8 40 00 00:47:09.560 READ FPDMA QUEUED
60 01 00 ab 4f b8 40 00 00:47:09.560 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 00:47:09.560 SET FEATURES [Reserved for Serial ATA]
27 00 00 00 00 00 e0 00 00:47:09.560 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 00:47:09.557 IDENTIFY DEVICE

Error 2182 occurred at disk power-on lifetime: 3162 hours (131 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 ad 4f b8 0a Error: UNC at LBA = 0x0ab84fad = 179851181

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 01 10 ab 4f b8 40 00 00:47:06.126 READ FPDMA QUEUED
60 01 08 ac 4f b8 40 00 00:47:06.126 READ FPDMA QUEUED
60 01 00 ad 4f b8 40 00 00:47:06.126 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 00:47:06.125 SET FEATURES [Reserved for Serial ATA]
27 00 00 00 00 00 e0 00 00:47:06.125 READ NATIVE MAX ADDRESS EXT

Error 2181 occurred at disk power-on lifetime: 3162 hours (131 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 aa 4f b8 0a Error: UNC at LBA = 0x0ab84faa = 179851178

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 01 18 ad 4f b8 40 00 00:47:02.693 READ FPDMA QUEUED
60 01 10 ac 4f b8 40 00 00:47:02.693 READ FPDMA QUEUED
60 01 08 ab 4f b8 40 00 00:47:02.693 READ FPDMA QUEUED
60 01 00 aa 4f b8 40 00 00:47:02.693 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 00:47:02.693 SET FEATURES [Reserved for Serial ATA]

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 90% 3162 742047976
# 2 Extended offline Completed: read failure 90% 3162 916410064
# 3 Extended offline Completed: read failure 90% 3162 943313616
# 4 Short offline Completed: read failure 90% 3161 949136216

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Dysk masz złom 05, C4 i C5 01
djarta pisze:@nitryloimina - C6 nie naprawisz takimi programami, wartość będzie i jej nie usuniesz.
Były 3 bady logiczne - przeszły do puli zapasowych i jest OK.


@milczar15_94 - zrób skan powierzchnii w MHDD. Daj też SMART z tego programu.


@szymon189 - dysk zdrowy, ma wolne sektory ale to nic strasznego. Możesz mu zrobić zerowanie o ile nie masz niczego do backupu na dysku.
Przyjacielu co do C6 można wyzerować, Kasując SMART przykładowo, ale to jest robota dla już medium fan.
Z dyskiem jestem w stanie zrobić prawie wszystko, Król HDD.

W sprawach Dyskowych pisać na GG: 68554272 (prawie zawsze dostępny), a także możecie pisać na mój staruszki numerek 5079748(Prawie zawsze dostępny)

Gdyby ktoś miał ochotę wspomóc, Zapraszam!

Awatar użytkownika
djarta

Globalny Moderator
Posty: 5854
Rejestracja: 26 gru 2008, 17:15
Lokalizacja: Białystok
Kontaktowanie:

Analiza SMART (S.M.A.R.T) dysku twardego.

Post23 gru 2015, 20:40

Jasne, że można. Janpas ma do tego sprzęt.



  • Reklama

Wróć do „Sprzęt komputerowy”



Kto jest online

Użytkownicy przeglądający to forum: Obecnie na forum nie ma żadnego zarejestrowanego użytkownika i 3 gości