Problem z penem Intenso 32GB

[marcin82]

Czyli wychodzi na to, że system widzi tylko dyski twarde. Właśnie dlatego pytałem o linuksa, bo sam mam Intenso 16 GB i jest widoczny "od kopa".

A zrób jeszcze tak:
- uruchom livecd
- uruchom konsolę roota
- klepnij komendę:

Kod: Zaznacz cały

dmesg -C

- podepnij pendrive
- odczekaj te 30 sekund
- podaj wynik całego polecenia:

Kod: Zaznacz cały

dmesg

Wstaw je na forum w tagach Code.

[batx23]

Kod: Zaznacz cały

[root@localhost ~]# dmesg -c
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct                               
[    0.000000] Linux version 3.15.9-pclos1 (root@localhost.localdomain) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Mon Aug 11 00:53:16 CDT 2014
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cff8ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cff90000-0x00000000cff9dfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cff9e000-0x00000000cffdffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cffe0000-0x00000000cfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fffffff] usable
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: MSI MS-7641/760GM-P21(FX) (MS-7641)    , BIOS V17.3 10/07/2011
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0xcff90 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFF0000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000230000000 aka 8960M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
[    0.000000] initial memory mapped: [mem 0x00000000-0x00bfffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x2ec00000-0x2effffff]
[    0.000000]  [mem 0x2ec00000-0x2effffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x28000000-0x2ebfffff]
[    0.000000]  [mem 0x28000000-0x2ebfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x27ffffff]
[    0.000000]  [mem 0x00100000-0x003fffff] page 4k
[    0.000000]  [mem 0x00400000-0x27ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x2f000000-0x2f3fdfff]
[    0.000000]  [mem 0x2f000000-0x2f3fdfff] page 4k
[    0.000000] BRK [0x007bb000, 0x007bbfff] PGTABLE
[    0.000000] BRK [0x007bc000, 0x007bdfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x7f48c000-0x7fffffff]
[    0.000000] Allocated new RAMDISK: [mem 0x2e88a000-0x2f3fdac4]
[    0.000000] Move RAMDISK from [mem 0x7f48c000-0x7ffffac4] to [mem 0x2e88a000-0x2f3fdac4]
[    0.000000] ACPI: RSDP 0x000F8B60 000014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 0xCFF90000 00003C (v01 7641MS A7641100 20111007 MSFT 00000097)
[    0.000000] ACPI: FACP 0xCFF90200 000084 (v01 7641MS A7641100 20111007 MSFT 00000097)
[    0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20140214/tbfadt-634)
[    0.000000] ACPI: DSDT 0xCFF90660 009C66 (v01 A7641  A7641100 00000100 INTL 20051117)
[    0.000000] ACPI: FACS 0xCFF9E000 000040
[    0.000000] ACPI: APIC 0xCFF90390 00010C (v01 7641MS A7641100 20111007 MSFT 00000097)
[    0.000000] ACPI: MCFG 0xCFF904A0 00003C (v01 7641MS OEMMCFG  20111007 MSFT 00000097)
[    0.000000] ACPI: OEMB 0xCFF9E040 000072 (v01 7641MS A7641100 20111007 MSFT 00000097)
[    0.000000] ACPI: HPET 0xCFF9A660 000038 (v01 7641MS OEMHPET  20111007 MSFT 00000097)
[    0.000000] ACPI: SSDT 0xCFF9A6A0 000B9C (v01 A M I  POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 2571MB HIGHMEM available.
[    0.000000] 755MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 2f3fe000
[    0.000000]   low ram: 0 - 2f3fe000
[    0.000000] BRK [0x007be000, 0x007befff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x2f3fdfff]
[    0.000000]   HighMem  [mem 0x2f3fe000-0xcff8ffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xcff8ffff]
[    0.000000] On node 0 totalpages: 851758
[    0.000000] free_area_init_node: node 0, pgdat c06d5640, node_mem_map ece8a020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 1480 pages used for memmap
[    0.000000]   Normal zone: 189438 pages, LIFO batch:31
[    0.000000]   HighMem zone: 5144 pages used for memmap
[    0.000000]   HighMem zone: 658322 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x90] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x91] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x92] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x93] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x94] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x95] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x96] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x97] disabled)
[    0.000000] ACPI: IOAPIC (id[0x14] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 20, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[    0.000000] smpboot: Allowing 24 CPUs, 20 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[    0.000000] e820: [mem 0xd0000000-0xffdfffff] available for PCI devices
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:24 nr_node_ids:1
[    0.000000] PERCPU: Embedded 12 pages/cpu @ecd58000 s28224 r0 d20928 u49152
[    0.000000] pcpu-alloc: s28224 r0 d20928 u49152 alloc=12*4096
[    0.000000] pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07
[    0.000000] pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 [0] 12 [0] 13 [0] 14 [0] 15
[    0.000000] pcpu-alloc: [0] 16 [0] 17 [0] 18 [0] 19 [0] 20 [0] 21 [0] 22 [0] 23
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 850246
[    0.000000] Kernel command line: livecd=livecd initrd=initrd.gz root=/dev/rd/3 quiet vga=788 keyb=us splash=silent
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Initializing HighMem for node 0 (0002f3fe:000cff90)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 3359684K/3407032K available (4683K kernel code, 306K rwdata, 1004K rodata, 492K init, 360K bss, 47348K reserved, 2633288K highmem)
[    0.000000] virtual kernel memory layout:
    fixmap  : 0xffab6000 - 0xfffff000   (5412 kB)
    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
    vmalloc : 0xefbfe000 - 0xff3fe000   ( 248 MB)
    lowmem  : 0xc0000000 - 0xef3fe000   ( 755 MB)
      .init : 0xc06de000 - 0xc0759000   ( 492 kB)
      .data : 0xc05932b6 - 0xc06dc9c0   (1317 kB)
      .text : 0xc0100000 - 0xc05932b6   (4684 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=24, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000]  RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=24.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=24
[    0.000000] NR_IRQS:4352 nr_irqs:872 16
[    0.000000] CPU 0 irqstacks, hard=ec80c000 soft=ec80e000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3600.009 MHz processor
[    0.000024] Calibrating delay loop (skipped), value calculated using timer frequency.. 7200.01 BogoMIPS (lpj=3600009)
[    0.000026] pid_max: default: 32768 minimum: 301
[    0.000030] ACPI: Core revision 20140214
[    0.002933] ACPI: All ACPI Tables successfully acquired
[    0.012864] Security Framework initialized
[    0.012873] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.012874] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.013003] Initializing cgroup subsys devices
[    0.013004] Initializing cgroup subsys freezer
[    0.013006] Initializing cgroup subsys net_cls
[    0.013007] Initializing cgroup subsys blkio
[    0.013008] Initializing cgroup subsys bfqio
[    0.013025] CPU: Physical Processor ID: 0
[    0.013025] CPU: Processor Core ID: 0
[    0.013028] mce: CPU supports 7 MCE banks
[    0.013034] LVT offset 1 assigned for vector 0xf9
[    0.013039] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
tlb_flushall_shift: 6
[    0.013268] Freeing SMP alternatives memory: 16K (c0759000 - c075d000)
[    0.013315] Overriding APIC driver with bigsmp
[    0.013316] Enabling APIC mode:  Physflat.  Using 1 I/O APICs
[    0.013499] Leaving ESR disabled.
[    0.013660] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.023647] smpboot: CPU0: AMD FX(tm)-4100 Quad-Core Processor (fam: 15, model: 01, stepping: 02)
[    0.124549] Performance Events: Fam15h core perfctr, AMD PMU driver.
[    0.124554] ... version:                0
[    0.124555] ... bit width:              48
[    0.124555] ... generic registers:      6
[    0.124556] ... value mask:             0000ffffffffffff
[    0.124557] ... max period:             00007fffffffffff
[    0.124558] ... fixed-purpose events:   0
[    0.124558] ... event mask:             000000000000003f
[    0.130572] MCE: In-kernel MCE decoding enabled.
[    0.132584] CPU 1 irqstacks, hard=ec8d6000 soft=ec8e0000
[    0.132586] x86: Booting SMP configuration:
[    0.132587] .... node  #0, CPUs:        #1
[    0.143346] Initializing CPU#1
[    0.144046] Leaving ESR disabled.
[    0.147556] CPU 2 irqstacks, hard=ec8ec000 soft=ec8ee000
[    0.147558]   #2
[    0.158310] Initializing CPU#2
[    0.158550] Leaving ESR disabled.
[    0.162529] CPU 3 irqstacks, hard=ec902000 soft=ec904000
[    0.162530]   #3
[    0.173286] Initializing CPU#3
[    0.173522] Leaving ESR disabled.
[    0.175658] x86: Booted up 1 node, 4 CPUs
[    0.175661] smpboot: Total of 4 processors activated (28800.07 BogoMIPS)
[    0.182188] devtmpfs: initialized
[    0.182385] PM: Registering ACPI NVS region [mem 0xcff9e000-0xcffdffff] (270336 bytes)
[    0.182483] pinctrl core: initialized pinctrl subsystem
[    0.182536] NET: Registered protocol family 16
[    0.182634] cpuidle: using governor ladder
[    0.182635] cpuidle: using governor menu
[    0.182681] ACPI: bus type PCI registered
[    0.182683] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.182736] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.182738] PCI: not using MMCONFIG
[    0.183565] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
[    0.183566] PCI: Using configuration type 1 for base access
[    0.183566] PCI: Using configuration type 1 for extended access
[    0.184578] ACPI: Added _OSI(Module Device)
[    0.184579] ACPI: Added _OSI(Processor Device)
[    0.184580] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.184581] ACPI: Added _OSI(Processor Aggregator Device)
[    0.186453] ACPI: Executed 4 blocks of module-level executable AML code
[    0.188837] ACPI: Interpreter enabled
[    0.188844] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580)
[    0.188848] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140214/hwxface-580)
[    0.188856] ACPI: (supports S0 S1 S4 S5)
[    0.188857] ACPI: Using IOAPIC for interrupt routing
[    0.188876] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.189397] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.189398] PCI: Using MMCONFIG for extended config space
[    0.189407] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.224488] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.224493] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.224496] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.224709] PCI host bridge to bus 0000:00
[    0.224711] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.224712] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.224714] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.224715] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.224717] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[    0.224718] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff]
[    0.224720] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
[    0.224730] pci 0000:00:00.0: [1022:9600] type 00 class 0x060000
[    0.224833] pci 0000:00:02.0: [1022:9603] type 01 class 0x060400
[    0.224871] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.224905] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.224942] pci 0000:00:05.0: [1022:9605] type 01 class 0x060400
[    0.224980] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[    0.225014] pci 0000:00:05.0: System wakeup disabled by ACPI
[    0.225072] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
[    0.225091] pci 0000:00:11.0: reg 0x10: [io  0xc000-0xc007]
[    0.225101] pci 0000:00:11.0: reg 0x14: [io  0xb000-0xb003]
[    0.225110] pci 0000:00:11.0: reg 0x18: [io  0xa000-0xa007]
[    0.225119] pci 0000:00:11.0: reg 0x1c: [io  0x9000-0x9003]
[    0.225128] pci 0000:00:11.0: reg 0x20: [io  0x8000-0x800f]
[    0.225138] pci 0000:00:11.0: reg 0x24: [mem 0xfbfffc00-0xfbffffff]
[    0.225158] pci 0000:00:11.0: set SATA to AHCI mode
[    0.225249] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    0.225262] pci 0000:00:12.0: reg 0x10: [mem 0xfbffe000-0xfbffefff]
[    0.225345] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.225383] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
[    0.225396] pci 0000:00:12.1: reg 0x10: [mem 0xfbffd000-0xfbffdfff]
[    0.225479] pci 0000:00:12.1: System wakeup disabled by ACPI
[    0.225523] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    0.225542] pci 0000:00:12.2: reg 0x10: [mem 0xfbfff800-0xfbfff8ff]
[    0.225625] pci 0000:00:12.2: supports D1 D2
[    0.225626] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.225662] pci 0000:00:12.2: System wakeup disabled by ACPI
[    0.225705] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[    0.225718] pci 0000:00:13.0: reg 0x10: [mem 0xfbffc000-0xfbffcfff]
[    0.225801] pci 0000:00:13.0: System wakeup disabled by ACPI
[    0.225836] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
[    0.225849] pci 0000:00:13.1: reg 0x10: [mem 0xfbffb000-0xfbffbfff]
[    0.225932] pci 0000:00:13.1: System wakeup disabled by ACPI
[    0.225972] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[    0.225992] pci 0000:00:13.2: reg 0x10: [mem 0xfbfff400-0xfbfff4ff]
[    0.226077] pci 0000:00:13.2: supports D1 D2
[    0.226078] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.226113] pci 0000:00:13.2: System wakeup disabled by ACPI
[    0.226156] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.226309] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[    0.226325] pci 0000:00:14.1: reg 0x10: [io  0x0000-0x0007]
[    0.226334] pci 0000:00:14.1: reg 0x14: [io  0x0000-0x0003]
[    0.226343] pci 0000:00:14.1: reg 0x18: [io  0x0000-0x0007]
[    0.226352] pci 0000:00:14.1: reg 0x1c: [io  0x0000-0x0003]
[    0.226361] pci 0000:00:14.1: reg 0x20: [io  0xff00-0xff0f]
[    0.226383] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.226384] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.226386] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.226387] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.226470] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    0.226492] pci 0000:00:14.2: reg 0x10: [mem 0xfbff4000-0xfbff7fff 64bit]
[    0.226558] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.226591] pci 0000:00:14.2: System wakeup disabled by ACPI
[    0.226630] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    0.226751] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.226812] pci 0000:00:14.4: System wakeup disabled by ACPI
[    0.226846] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[    0.226859] pci 0000:00:14.5: reg 0x10: [mem 0xfbffa000-0xfbffafff]
[    0.226942] pci 0000:00:14.5: System wakeup disabled by ACPI
[    0.226980] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
[    0.227043] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
[    0.227100] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
[    0.227158] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
[    0.227219] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
[    0.227276] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
[    0.227388] pci 0000:01:00.0: [10de:1244] type 00 class 0x030000
[    0.227398] pci 0000:01:00.0: reg 0x10: [mem 0xfc000000-0xfdffffff]
[    0.227408] pci 0000:01:00.0: reg 0x14: [mem 0xd8000000-0xdfffffff 64bit pref]
[    0.227418] pci 0000:01:00.0: reg 0x1c: [mem 0xd4000000-0xd7ffffff 64bit pref]
[    0.227424] pci 0000:01:00.0: reg 0x24: [io  0xd800-0xd87f]
[    0.227431] pci 0000:01:00.0: reg 0x30: [mem 0xfeb00000-0xfeb7ffff pref]
[    0.227516] pci 0000:01:00.1: [10de:0bee] type 00 class 0x040300
[    0.227526] pci 0000:01:00.1: reg 0x10: [mem 0xfebf8000-0xfebfbfff]
[    0.229377] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.229381] pci 0000:00:02.0:   bridge window [io  0xd000-0xdfff]
[    0.229383] pci 0000:00:02.0:   bridge window [mem 0xfc000000-0xfebfffff]
[    0.229387] pci 0000:00:02.0:   bridge window [mem 0xd4000000-0xdfffffff 64bit pref]
[    0.229439] pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000
[    0.229452] pci 0000:02:00.0: reg 0x10: [io  0xe800-0xe8ff]
[    0.229472] pci 0000:02:00.0: reg 0x18: [mem 0xfafff000-0xfaffffff 64bit pref]
[    0.229485] pci 0000:02:00.0: reg 0x20: [mem 0xfaff8000-0xfaffbfff 64bit pref]
[    0.229550] pci 0000:02:00.0: supports D1 D2
[    0.229552] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.231371] pci 0000:00:05.0: PCI bridge to [bus 02]
[    0.231375] pci 0000:00:05.0:   bridge window [io  0xe000-0xefff]
[    0.231379] pci 0000:00:05.0:   bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[    0.231457] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
[    0.231466] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.231467] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.231469] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.231470] pci 0000:00:14.4:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[    0.231472] pci 0000:00:14.4:   bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
[    0.231473] pci 0000:00:14.4:   bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[    0.231488] pci_bus 0000:00: on NUMA node 0
[    0.247576] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 12 14 15)
[    0.247613] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *11 12 14 15)
[    0.247648] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
[    0.247681] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15)
[    0.247715] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[    0.247749] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[    0.247782] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 *7 10 11 12 14 15)
[    0.247815] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[    0.247930] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.247931] vgaarb: loaded
[    0.247932] vgaarb: bridge control possible 0000:01:00.0
[    0.247940] sta2x11_scr_init
[    0.247946] sta2x11_apb_soc_regs_init
[    0.247954] sta2x11_sctl_init
[    0.247959] sta2x11_apbreg_init
[    0.248118] SCSI subsystem initialized
[    0.248228] PCI: Using ACPI for IRQ routing
[    0.248229] PCI: pci_cache_line_size set to 64 bytes
[    0.248290] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[    0.248292] e820: reserve RAM buffer [mem 0xcff90000-0xcfffffff]
[    0.248380] NetLabel: Initializing
[    0.248381] NetLabel:  domain hash size = 128
[    0.248381] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.248390] NetLabel:  unlabeled traffic allowed by default
[    0.248446] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.248449] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[    0.250500] Switched to clocksource hpet
[    0.250536] pnp: PnP ACPI init
[    0.250544] ACPI: bus type PNP registered
[    0.250644] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.250675] pnp 00:01: [dma 4]
[    0.250695] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.250726] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.250749] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.250774] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.250926] pnp 00:05: [dma 0 disabled]
[    0.250972] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.251012] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.251095] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.251097] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.251099] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.251252] system 00:08: [io  0x04d0-0x04d1] has been reserved
[    0.251253] system 00:08: [io  0x040b] has been reserved
[    0.251255] system 00:08: [io  0x04d6] has been reserved
[    0.251256] system 00:08: [io  0x0c00-0x0c01] has been reserved
[    0.251258] system 00:08: [io  0x0c14] has been reserved
[    0.251259] system 00:08: [io  0x0c50-0x0c51] has been reserved
[    0.251261] system 00:08: [io  0x0c52] has been reserved
[    0.251262] system 00:08: [io  0x0c6c] has been reserved
[    0.251263] system 00:08: [io  0x0c6f] has been reserved
[    0.251265] system 00:08: [io  0x0cd0-0x0cd1] has been reserved
[    0.251266] system 00:08: [io  0x0cd2-0x0cd3] has been reserved
[    0.251268] system 00:08: [io  0x0cd4-0x0cd5] has been reserved
[    0.251269] system 00:08: [io  0x0cd6-0x0cd7] has been reserved
[    0.251271] system 00:08: [io  0x0cd8-0x0cdf] has been reserved
[    0.251272] system 00:08: [io  0x0800-0x089f] could not be reserved
[    0.251274] system 00:08: [io  0x0b00-0x0b0f] has been reserved
[    0.251275] system 00:08: [io  0x0b20-0x0b3f] has been reserved
[    0.251277] system 00:08: [io  0x0900-0x090f] has been reserved
[    0.251278] system 00:08: [io  0x0910-0x091f] has been reserved
[    0.251280] system 00:08: [io  0xfe00-0xfefe] has been reserved
[    0.251282] system 00:08: [mem 0xffb80000-0xffbfffff] has been reserved
[    0.251283] system 00:08: [mem 0xfec10000-0xfec1001f] has been reserved
[    0.251285] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.251344] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.251449] system 00:0a: [io  0x0e80-0x0f5f] has been reserved
[    0.251450] system 00:0a: [io  0x0ae0-0x0aef] has been reserved
[    0.251452] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.251521] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[    0.251523] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.296577] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.296579] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.296581] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.296582] system 00:0c: [mem 0x00100000-0xcfffffff] could not be reserved
[    0.296584] system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved
[    0.296586] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.296665] pnp: PnP ACPI: found 13 devices
[    0.296666] ACPI: bus type PNP unregistered
[    0.296666] PnPBIOS: Disabled
[    0.333248] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.333250] pci 0000:00:02.0:   bridge window [io  0xd000-0xdfff]
[    0.333253] pci 0000:00:02.0:   bridge window [mem 0xfc000000-0xfebfffff]
[    0.333255] pci 0000:00:02.0:   bridge window [mem 0xd4000000-0xdfffffff 64bit pref]
[    0.333258] pci 0000:00:05.0: PCI bridge to [bus 02]
[    0.333260] pci 0000:00:05.0:   bridge window [io  0xe000-0xefff]
[    0.333263] pci 0000:00:05.0:   bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[    0.333266] pci 0000:00:14.4: PCI bridge to [bus 03]
[    0.333277] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.333279] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.333280] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.333281] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.333283] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
[    0.333284] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[    0.333285] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    0.333287] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfebfffff]
[    0.333288] pci_bus 0000:01: resource 2 [mem 0xd4000000-0xdfffffff 64bit pref]
[    0.333290] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.333291] pci_bus 0000:02: resource 2 [mem 0xfaf00000-0xfaffffff 64bit pref]
[    0.333293] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
[    0.333294] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
[    0.333296] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[    0.333297] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
[    0.333298] pci_bus 0000:03: resource 8 [mem 0xd0000000-0xdfffffff]
[    0.333300] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff]
[    0.333317] NET: Registered protocol family 2
[    0.333453] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.333464] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.333479] TCP: Hash tables configured (established 8192 bind 8192)
[    0.333492] TCP: reno registered
[    0.333495] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.333499] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.333549] NET: Registered protocol family 1
[    0.719895] pci 0000:01:00.0: Boot video device
[    0.719907] PCI: CLS 64 bytes, default 64
[    0.719943] Trying to unpack rootfs image as initramfs...
[    0.720033] rootfs image is not initramfs (no cpio magic); looks like an initrd
[    0.728210] Freeing initrd memory: 11728K (ee88a000 - ef3fe000)
[    0.728215] sta2x11_mfd_init
[    0.728453] perf: AMD NB counters detected
[    0.728495] microcode: CPU0: patch_level=0x06000613
[    0.728502] microcode: CPU1: patch_level=0x06000613
[    0.728513] microcode: CPU2: patch_level=0x06000613
[    0.728521] microcode: CPU3: patch_level=0x06000613
[    0.728577] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.728580] LVT offset 0 assigned for vector 0x400
[    0.728599] perf: AMD IBS detected (0x000000ff)
[    0.728608] apm: BIOS not found.
[    0.729044] futex hash table entries: 8192 (order: 7, 524288 bytes)
[    0.729147] audit: initializing netlink subsys (disabled)
[    0.729158] audit: type=2000 audit(1410396977.611:1): initialized
[    0.729348] bounce pool size: 64 pages
[    0.729356] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.730464] zbud: loaded
[    0.730547] VFS: Disk quotas dquot_6.5.2
[    0.730579] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.730672] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[    0.731108] aufs 3.x-rcN
[    0.731111] msgmni has been set to 1441
[    0.731387] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.731431] io scheduler noop registered
[    0.731432] io scheduler deadline registered
[    0.731437] io scheduler cfq registered
[    0.731441] io scheduler bfq registered (default)
[    0.731442] BFQ I/O-scheduler version: v7r5
[    0.731639] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[    0.731783] pcieport 0000:00:05.0: irq 41 for MSI/MSI-X
[    0.731844] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.731859] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.731921] simple-framebuffer simple-framebuffer.0: framebuffer at 0xd5000000, 0xeb000 bytes, mapped to 0xefc80000
[    0.731923] simple-framebuffer simple-framebuffer.0: format=r5g6b5, mode=800x600x16, linelength=1600
[    0.731996] Console: switching to colour frame buffer device 100x37
[    0.733721] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
[    0.733764] GHES: HEST is not enabled!
[    0.733811] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.733841] isapnp: Scanning for PnP cards...
[    0.754404] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.754782] Linux agpgart interface v0.103
[    0.756633] brd: module loaded
[    0.756836] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.756837] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.757002] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.757107] mousedev: PS/2 mouse device common for all mice
[    0.757206] rtc_cmos 00:02: RTC can wake from S4
[    0.757336] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.757362] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.757381] ledtrig-cpu: registered to indicate activity on CPUs
[    0.757450] TCP: cubic registered
[    0.757458] Key type dns_resolver registered
[    0.757656] Using IPI No-Shortcut mode
[    0.757758] registered taskstats version 1
[    0.758153] rtc_cmos 00:02: setting system clock to 2014-09-11 00:56:18 UTC (1410396978)
[    0.758156] BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
[    0.778735] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.092872] isapnp: No Plug & Play device found
[    1.092893] md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
[    1.092918] RAMDISK: gzip image found at block 0
[    1.228220] VFS: Mounted root (ext2 filesystem) on device 1:0.
[    1.728204] tsc: Refined TSC clocksource calibration: 3600.027 MHz
[    2.139492] Uniform Multi-Platform E-IDE driver
[    2.141244] ide-cd driver 5.00
[    2.180848] ACPI: bus type USB registered
[    2.180880] usbcore: registered new interface driver usbfs
[    2.180896] usbcore: registered new interface driver hub
[    2.180963] usbcore: registered new device driver usb
[    2.184449] usbcore: registered new interface driver usb-storage
[    2.186223] uhci_hcd: USB Universal Host Controller Interface driver
[    2.188175] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.190322] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.190323] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[    2.194898] ohci-pci: OHCI PCI platform driver
[    2.195048] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    2.195053] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
[    2.195084] ohci-pci 0000:00:12.0: irq 16, io mem 0xfbffe000
[    2.249458] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    2.249460] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.249461] usb usb1: Product: OHCI PCI host controller
[    2.249462] usb usb1: Manufacturer: Linux 3.15.9-pclos1 ohci_hcd
[    2.249464] usb usb1: SerialNumber: 0000:00:12.0
[    2.249595] hub 1-0:1.0: USB hub found
[    2.249606] hub 1-0:1.0: 3 ports detected
[    2.249834] ohci-pci 0000:00:12.1: OHCI PCI host controller
[    2.249838] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 2
[    2.249854] ohci-pci 0000:00:12.1: irq 16, io mem 0xfbffd000
[    2.304373] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.304375] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.304376] usb usb2: Product: OHCI PCI host controller
[    2.304377] usb usb2: Manufacturer: Linux 3.15.9-pclos1 ohci_hcd
[    2.304379] usb usb2: SerialNumber: 0000:00:12.1
[    2.304502] hub 2-0:1.0: USB hub found
[    2.304511] hub 2-0:1.0: 3 ports detected
[    2.304737] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    2.304741] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 3
[    2.304764] ohci-pci 0000:00:13.0: irq 18, io mem 0xfbffc000
[    2.359283] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    2.359285] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.359286] usb usb3: Product: OHCI PCI host controller
[    2.359287] usb usb3: Manufacturer: Linux 3.15.9-pclos1 ohci_hcd
[    2.359288] usb usb3: SerialNumber: 0000:00:13.0
[    2.359414] hub 3-0:1.0: USB hub found
[    2.359423] hub 3-0:1.0: 3 ports detected
[    2.359639] ohci-pci 0000:00:13.1: OHCI PCI host controller
[    2.359644] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 4
[    2.359660] ohci-pci 0000:00:13.1: irq 18, io mem 0xfbffb000
[    2.414202] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    2.414204] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.414205] usb usb4: Product: OHCI PCI host controller
[    2.414206] usb usb4: Manufacturer: Linux 3.15.9-pclos1 ohci_hcd
[    2.414207] usb usb4: SerialNumber: 0000:00:13.1
[    2.414333] hub 4-0:1.0: USB hub found
[    2.414346] hub 4-0:1.0: 3 ports detected
[    2.414551] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    2.414555] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5
[    2.414571] ohci-pci 0000:00:14.5: irq 18, io mem 0xfbffa000
[    2.469118] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    2.469120] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.469121] usb usb5: Product: OHCI PCI host controller
[    2.469122] usb usb5: Manufacturer: Linux 3.15.9-pclos1 ohci_hcd
[    2.469123] usb usb5: SerialNumber: 0000:00:14.5
[    2.469247] hub 5-0:1.0: USB hub found
[    2.469258] hub 5-0:1.0: 2 ports detected
[    2.471095] ehci-pci: EHCI PCI platform driver
[    2.571900] usb 1-1: new low-speed USB device number 2 using ohci-pci
[    2.726707] Switched to clocksource tsc
[    2.961309] usb 1-1: New USB device found, idVendor=04f3, idProduct=0602
[    2.961311] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.961313] usb 1-1: Product: Wireless Input device
[    2.961314] usb 1-1: Manufacturer: HID-Compliant Wireless Keyboard/Mouse
[    2.963451] usb 1-1: USB disconnect, device number 2
[    2.965494] ehci-pci 0000:00:12.2: EHCI Host Controller
[    2.965500] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 6
[    2.965503] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    2.965515] ehci-pci 0000:00:12.2: debug port 1
[    2.965545] ehci-pci 0000:00:12.2: irq 17, io mem 0xfbfff800
[    2.971276] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    2.971308] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[    2.971309] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.971311] usb usb6: Product: EHCI Host Controller
[    2.971312] usb usb6: Manufacturer: Linux 3.15.9-pclos1 ehci_hcd
[    2.971313] usb usb6: SerialNumber: 0000:00:12.2
[    2.971418] hub 6-0:1.0: USB hub found
[    2.971423] hub 6-0:1.0: 6 ports detected
[    3.020239] hub 1-0:1.0: USB hub found
[    3.020262] hub 1-0:1.0: 3 ports detected
[    3.069154] hub 2-0:1.0: USB hub found
[    3.069163] hub 2-0:1.0: 3 ports detected
[    3.167053] ehci-pci 0000:00:13.2: EHCI Host Controller
[    3.167058] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 7
[    3.167060] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    3.167072] ehci-pci 0000:00:13.2: debug port 1
[    3.167101] ehci-pci 0000:00:13.2: irq 19, io mem 0xfbfff400
[    3.172954] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    3.173019] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[    3.173021] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.173022] usb usb7: Product: EHCI Host Controller
[    3.173023] usb usb7: Manufacturer: Linux 3.15.9-pclos1 ehci_hcd
[    3.173024] usb usb7: SerialNumber: 0000:00:13.2
[    3.173138] hub 7-0:1.0: USB hub found
[    3.173146] hub 7-0:1.0: 6 ports detected
[    3.221924] hub 3-0:1.0: USB hub found
[    3.221946] hub 3-0:1.0: 3 ports detected
[    3.270838] hub 4-0:1.0: USB hub found
[    3.270846] hub 4-0:1.0: 3 ports detected
[    3.277969] loop: module loaded
[    3.281450] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    3.594910] libata version 3.00 loaded.
[    3.595957] scsi0 : pata_atiixp
[    3.596045] scsi1 : pata_atiixp
[    3.596089] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[    3.596091] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[    3.772466] ata2.01: HPA detected: current 488395055, native 488397168
[    3.772469] ata2.01: ATA-7: ST3250410AS, 3.AAF, max UDMA/133
[    3.772471] ata2.01: 488395055 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    3.778447] ata2.01: configured for UDMA/100
[    3.778532] scsi 1:0:1:0: Direct-Access     ATA      ST3250410AS      3.AA PQ: 0 ANSI: 5
[    3.778706] sd 1:0:1:0: [sda] 488395055 512-byte logical blocks: (250 GB/232 GiB)
[    3.778760] sd 1:0:1:0: [sda] Write Protect is off
[    3.778763] sd 1:0:1:0: [sda] Mode Sense: 00 3a 00 00
[    3.778790] sd 1:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.821990]  sda: sda1 sda2 < sda5 sda6 >
[    3.822328] sd 1:0:1:0: [sda] Attached SCSI disk
[    3.823842] ahci 0000:00:11.0: version 3.0
[    3.824027] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    3.824029] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[    3.824536] scsi2 : ahci
[    3.824626] scsi3 : ahci
[    3.824717] scsi4 : ahci
[    3.824821] scsi5 : ahci
[    3.824873] ata3: SATA max UDMA/133 abar m1024@0xfbfffc00 port 0xfbfffd00 irq 22
[    3.824875] ata4: SATA max UDMA/133 abar m1024@0xfbfffc00 port 0xfbfffd80 irq 22
[    3.824877] ata5: SATA max UDMA/133 abar m1024@0xfbfffc00 port 0xfbfffe00 irq 22
[    3.824879] ata6: SATA max UDMA/133 abar m1024@0xfbfffc00 port 0xfbfffe80 irq 22
[    3.852905] usb 1-1: new low-speed USB device number 3 using ohci-pci
[    4.129505] ata6: SATA link down (SStatus 0 SControl 300)
[    4.242298] usb 1-1: New USB device found, idVendor=04f3, idProduct=0602
[    4.242300] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.242302] usb 1-1: Product: Wireless Input device
[    4.242303] usb 1-1: Manufacturer: HID-Compliant Wireless Keyboard/Mouse
[    4.283231] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    4.284230] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.284250] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    4.284507] ata4.00: ATAPI: ATAPI   iHAS122, ZL0E, max UDMA/100
[    4.285294] ata4.00: configured for UDMA/100
[    4.285376] ata5.00: HPA detected: current 1953523055, native 1953525168
[    4.285379] ata5.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[    4.285380] ata5.00: 1953523055 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    4.286675] ata5.00: configured for UDMA/133
[    4.312249] ata3.00: ATA-8: ST31000340NS, SN06, max UDMA/133
[    4.312251] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    4.354587] ata3.00: configured for UDMA/133
[    4.354663] scsi 2:0:0:0: Direct-Access     ATA      ST31000340NS     SN06 PQ: 0 ANSI: 5
[    4.354837] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    4.354902] sd 2:0:0:0: [sdb] Write Protect is off
[    4.354904] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    4.354914] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.355967] scsi 3:0:0:0: CD-ROM            ATAPI    iHAS122          ZL0E PQ: 0 ANSI: 5
[    4.367173]  sdb: sdb1 sdb2 sdb3
[    4.367406] sd 2:0:0:0: [sdb] Attached SCSI disk
[    4.371097] sr0: scsi3-mmc drive: 47x/125x writer dvd-ram cd/rw xa/form2 cdda tray
[    4.371099] cdrom: Uniform CD-ROM driver Revision: 3.20
[    4.371212] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    4.371340] scsi 4:0:0:0: Direct-Access     ATA      ST31000528AS     CC38 PQ: 0 ANSI: 5
[    4.371474] sd 4:0:0:0: [sdc] 1953523055 512-byte logical blocks: (1.00 TB/931 GiB)
[    4.371563] sd 4:0:0:0: [sdc] Write Protect is off
[    4.371565] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    4.371589] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.415664]  sdc: sdc1 sdc2 < sdc5 sdc6 >
[    4.416011] sd 4:0:0:0: [sdc] Attached SCSI disk
[    4.886300] usb 2-1: new full-speed USB device number 2 using ohci-pci
[    5.034043] usb 2-1: New USB device found, idVendor=041e, idProduct=4052
[    5.034045] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.034046] usb 2-1: Product: Creative Live! Cam Vista IM
[    5.034048] usb 2-1: Manufacturer:                             
[    5.262695] usb 2-2: new low-speed USB device number 3 using ohci-pci
[    5.412445] usb 2-2: New USB device found, idVendor=0bc7, idProduct=0006
[    5.412449] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.412451] usb 2-2: Product: USB Receiver
[    5.412452] usb 2-2: Manufacturer: X10 Wireless Technology Inc
[    5.641105] usb 2-3: new low-speed USB device number 4 using ohci-pci
[    5.789848] usb 2-3: New USB device found, idVendor=04d9, idProduct=1135
[    5.789850] usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   14.667906] ISO 9660 Extensions: Microsoft Joliet Level 3
[   14.709164] ISO 9660 Extensions: RRIP_1991A
[   15.657710] random: nonblocking pool is initialized
[   34.383974] udev[620]: starting version 167
[   38.868615] sd 1:0:1:0: Attached scsi generic sg0 type 0
[   38.868695] sd 2:0:0:0: Attached scsi generic sg1 type 0
[   38.868770] sr 3:0:0:0: Attached scsi generic sg2 type 5
[   38.868842] sd 4:0:0:0: Attached scsi generic sg3 type 0
[   44.851181] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   44.851187] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[   44.851381] r8169 0000:02:00.0: irq 42 for MSI/MSI-X
[   44.851519] r8169 0000:02:00.0 eth0: RTL8105e at 0xf02da000, 8c:89:a5:7e:e9:a4, XID 00a00000 IRQ 42
[   46.040882] wmi: Mapper loaded
[   49.448099] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[   49.448144] ACPI: Power Button [PWRB]
[   49.448159] ACPI: acpi_idle registered with cpuidle
[   49.448301] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[   49.448343] ACPI: Power Button [PWRF]
[   50.915171] acpi-cpufreq: overriding BIOS provided _PSD data
[   55.751137] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[   55.751195] sp5100_tco: PCI Revision ID: 0x3c
[   55.751216] sp5100_tco: failed to find MMIO address, giving up.
[   55.912192] kvm: Nested Virtualization enabled
[   58.810460] ACPI Warning: SystemIO range 0x00000b00-0x00000b07 conflicts with OpRegion 0x00000b00-0x00000b0f (\SOR1) (20140214/utaddress-258)
[   58.810466] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   60.805565] snd_hda_intel 0000:01:00.1: Disabling MSI
[   60.805574] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[   60.813403] sound hdaudioC0D3: No codec parser is available
[   61.005116] sound hdaudioC1D0: No codec parser is available
[   61.005312] sound hdaudioC1D1: No codec parser is available
[   61.005527] sound hdaudioC1D2: No codec parser is available
[   61.005734] sound hdaudioC1D3: No codec parser is available
[   63.295976] hidraw: raw HID events driver (C) Jiri Kosina
[   64.098953] usbcore: registered new interface driver usbhid
[   64.098955] usbhid: USB HID core driver
[   64.155184] input: HID-Compliant Wireless Keyboard/Mouse Wireless Input device as /devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1:1.0/0003:04F3:0602.0001/input/input3
[   64.155282] hid-generic 0003:04F3:0602.0001: input,hidraw0: USB HID v1.10 Keyboard [HID-Compliant Wireless Keyboard/Mouse Wireless Input device] on usb-0000:00:12.0-1/input0
[   64.155695] input: HID-Compliant Wireless Keyboard/Mouse Wireless Input device as /devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1:1.1/0003:04F3:0602.0002/input/input4
[   64.155803] hid-generic 0003:04F3:0602.0002: input,hidraw1: USB HID v1.10 Mouse [HID-Compliant Wireless Keyboard/Mouse Wireless Input device] on usb-0000:00:12.0-1/input1
[   64.156000] input: HID 04d9:1135 as /devices/pci0000:00/0000:00:12.1/usb2/2-3/2-3:1.0/0003:04D9:1135.0003/input/input5
[   64.156110] hid-generic 0003:04D9:1135.0003: input,hidraw2: USB HID v1.10 Mouse [HID 04d9:1135] on usb-0000:00:12.1-3/input0
[   64.773311] media: Linux media interface: v0.10
[   67.533388] Couldn't load IR keymap rc-medion-x10-digitainer
[   67.533390] Registered IR keymap rc-empty
[   67.533482] input: X10 Wireless Technology Inc USB Receiver as /devices/pci0000:00/0000:00:12.1/usb2/2-2/2-2:1.0/rc/rc0/input6
[   67.533538] rc0: X10 Wireless Technology Inc USB Receiver as /devices/pci0000:00/0000:00:12.1/usb2/2-2/2-2:1.0/rc/rc0
[   67.533583] input: X10 Wireless Technology Inc USB Receiver mouse as /devices/pci0000:00/0000:00:12.1/usb2/2-2/2-2:1.0/input/input7
[   67.533689] usbcore: registered new interface driver ati_remote
[   69.622136] Linux video capture interface: v2.00
[   69.631385] gspca_main: v2.14.0 registered
[   69.657207] gspca_main: ov519-2.14.0 probing 041e:4052
[   71.605956] input: ov519 as /devices/pci0000:00/0000:00:12.1/usb2/2-1/input/input8
[   71.606068] usbcore: registered new interface driver ov519
[   78.854863] fuse init (API version 7.23)
[   79.317972] Non-volatile memory driver v1.3
[   88.230645] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[   88.264728] ide-gd driver 1.18
[  137.210326] [drm] Initialized drm 1.1.0 20060810
[  137.293032] nvidia: module license 'NVIDIA' taints kernel.
[  137.293034] Disabling lock debugging due to kernel taint
[  137.300131] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[  137.300630] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
[  137.300639] NVRM: loading NVIDIA UNIX x86 Kernel Module  340.24  Wed Jul  2 13:36:28 PDT 2014
[  138.395747] device-mapper: uevent: version 1.0.3
[  138.396199] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[  140.024375] Freeing unused kernel memory: 492K (c06de000 - c0759000)
[  142.179580] vboxdrv: Found 4 processor cores.
[  142.180372] vboxdrv: fAsync=0 offMin=0x22a offMax=0x47af
[  142.180460] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[  142.180461] vboxdrv: Successfully loaded version 4.3.14 (interface 0x001a0007).
[  142.652002] vboxpci: IOMMU not found (not registered)
[  143.413766] NET: Registered protocol family 10
[  145.985345] r8169 0000:02:00.0 eth0: link down
[  145.985379] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  145.985493] r8169 0000:02:00.0 eth0: link down
[  147.637002] r8169 0000:02:00.0 eth0: link up
[  147.637010] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  150.479559] NET: Registered protocol family 17
[  161.356764] snd_hda_intel 0000:01:00.1: Disabling MSI
[  161.356771] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[  161.444365] sound hdaudioC0D3: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[  161.444372] sound hdaudioC0D3:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[  161.444376] sound hdaudioC0D3:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[  161.444379] sound hdaudioC0D3:    mono: mono_out=0x0
[  161.444382] sound hdaudioC0D3:    inputs:
[  161.444386] sound hdaudioC0D3:      Front Mic=0x19
[  161.444389] sound hdaudioC0D3:      Rear Mic=0x18
[  161.444393] sound hdaudioC0D3:      Line=0x1a
[  161.461376] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[  161.462524] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[  161.462619] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[  161.462868] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[  161.463149] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[  161.785286] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
[  161.788278] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
[  161.788529] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
[  161.789557] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input17
[  162.697534] usbcore: registered new interface driver snd-usb-audio
[  163.532099] nvidia 0000:01:00.0: irq 43 for MSI/MSI-X
[  164.100892] NVRM: Your system is not currently configured to drive a VGA console
[  164.100895] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[  164.100896] NVRM: requires the use of a text-mode VGA console. Use of other console
[  164.100898] NVRM: drivers including, but not limited to, vesafb, may result in
[  164.100899] NVRM: corruption and stability problems, and is not supported.
[  231.139332] ata2.01: configured for UDMA/100
[  231.139335] ata2: EH complete
[  231.269716] ata3.00: configured for UDMA/133
[  231.269720] ata3: EH complete
[  231.387631] ata5.00: configured for UDMA/133
[  231.387637] ata5: EH complete
[  252.484128] snd_hda_intel 0000:01:00.1: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[  788.308179] usb 6-2: new high-speed USB device number 6 using ehci-pci
[  788.424369] usb 6-2: New USB device found, idVendor=058f, idProduct=1234
[  788.424375] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  788.424379] usb 6-2: Product: Mass Storage Device
[  788.424382] usb 6-2: Manufacturer: Alcor Micro
[  788.424862] usb-storage 6-2:1.0: USB Mass Storage device detected
[  788.425089] scsi6 : usb-storage 6-2:1.0
[  789.426182] scsi 6:0:0:0: Direct-Access     Generic  USB Flash Disk   7.76 PQ: 0 ANSI: 4
[  789.426638] sd 6:0:0:0: Attached scsi generic sg4 type 0
[  789.427899] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[root@localhost ~]#


[marcin82]

[ 788.308179] usb 6-2: new high-speed USB device number 6 using ehci-pci
[ 788.424369] usb 6-2: New USB device found, idVendor=058f, idProduct=1234
[ 788.424375] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 788.424379] usb 6-2: Product: Mass Storage Device
[ 788.424382] usb 6-2: Manufacturer: Alcor Micro
[ 788.424862] usb-storage 6-2:1.0: USB Mass Storage device detected
[ 788.425089] scsi6 : usb-storage 6-2:1.0
[ 789.426182] scsi 6:0:0:0: Direct-Access Generic USB Flash Disk 7.76 PQ: 0 ANSI: 4
[ 789.426638] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 789.427899] sd 6:0:0:0: [sdd] Attached SCSI removable disk

Jest wykryty. Powinien być zatem na pewno widoczny po:

Kod: Zaznacz cały

fdisk -l

Kod: Zaznacz cały

lsusb

Mam pomysł jeszcze jeden - odezwę się po południu na PW.