janpas
Tak, zgadza się, laptop został oryginalnie zakupiony jakieś dwa i pół tygodnia temu. Czy problemem tutaj mogą być te temperatury koło 55-60, gdy 55 to jest max producenta ? Co z tym zrobić ?
Dzięki za pomoc.
Analiza SMART (S.M.A.R.T) dysku twardego.
-
zgreg
- Posty: 1
- Rejestracja: 13 sie 2012, 18:44
Analiza SMART (S.M.A.R.T) dysku twardego.
Witam
Proszę o analizę, komputer się wiesza czasem resetuje, reinstalacja windows XP nie pomogła.
martctl 5.42 2011-10-20 r3458 [i686-linux-3.4.4-lesslinux-000] (local build)
Copyright (C) 2002-11 by Bruce Allen, Dostępne tylko dla zarejestrowanych użytkowników
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint P120
Device Model: SAMSUNG SP2014N
Serial Number: S088J10YB02323
Firmware Version: VC100-33
User Capacity: 200,048,565,760 bytes [200 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 4a
Local Time is: Tue Aug 14 00:34:53 2012 CEST
==> WARNING: May need -F samsung3 enabled; see manual for details.
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 4622) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 77) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 253 100 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0007 100 100 025 Pre-fail Always - 6016
4 Start_Stop_Count 0x0032 096 096 000 Old_age Always - 4728
5 Reallocated_Sector_Ct 0x0033 253 253 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0
8 Seek_Time_Performance 0x0025 253 253 015 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 7728
10 Spin_Retry_Count 0x0033 253 253 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0012 253 002 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 097 097 000 Old_age Always - 3991
190 Airflow_Temperature_Cel 0x0022 154 106 000 Old_age Always - 28
194 Temperature_Celsius 0x0022 154 106 000 Old_age Always - 28
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 413
196 Reallocated_Event_Count 0x0032 253 253 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 4
198 Offline_Uncorrectable 0x0030 253 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000a 253 100 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x000a 253 100 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 33 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 33 occurred at disk power-on lifetime: 288 hours (12 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 8f ce 63 44 Error: UNC 8 sectors at LBA = 0x0463ce8f = 73649807
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 8f ce 63 44 00 00:13:23.188 READ DMA
ca 00 08 0f 68 63 44 00 00:13:23.188 WRITE DMA
ca 00 08 47 00 5e 40 00 00:13:23.188 WRITE DMA
c8 00 01 00 00 00 40 00 00:13:23.188 READ DMA
Error 32 occurred at disk power-on lifetime: 288 hours (12 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 8f ce 63 44 Error: UNC 8 sectors at LBA = 0x0463ce8f = 73649807
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 8f ce 63 44 00 00:13:21.375 READ DMA
ca 00 08 0f 68 63 44 00 00:13:21.375 WRITE DMA
ca 00 48 ff 7d 19 44 00 00:13:21.375 WRITE DMA
ca 00 40 27 ed e2 40 00 00:13:21.375 WRITE DMA
ca 00 20 bf 67 5e 40 00 00:13:21.375 WRITE DMA
Error 31 occurred at disk power-on lifetime: 288 hours (12 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 8f ce 63 44 Error: UNC 8 sectors at LBA = 0x0463ce8f = 73649807
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 8f ce 63 44 00 00:13:19.500 READ DMA
ca 00 10 07 68 63 44 00 00:13:19.500 WRITE DMA
ca 00 40 bf 7d 19 44 00 00:13:19.500 WRITE DMA
ca 00 50 d7 e9 e2 40 00 00:13:19.500 WRITE DMA
Error 30 occurred at disk power-on lifetime: 288 hours (12 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 8f ce 63 44 Error: UNC 8 sectors at LBA = 0x0463ce8f = 73649807
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 8f ce 63 44 00 00:13:17.625 READ DMA
ca 00 28 97 7d 19 44 00 00:13:17.625 WRITE DMA
ca 00 20 77 7d 19 44 00 00:13:17.625 WRITE DMA
ca 00 20 77 7d 19 44 00 00:13:17.625 WRITE DMA
ca 00 38 3f 7d 19 44 00 00:13:17.625 WRITE DMA
Error 29 occurred at disk power-on lifetime: 288 hours (12 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 8f ce 63 44 Error: UNC 8 sectors at LBA = 0x0463ce8f = 73649807
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 8f ce 63 44 00 00:13:15.688 READ DMA
ca 00 40 a7 78 19 44 00 00:13:15.688 WRITE DMA
ca 00 80 5f e2 20 43 00 00:13:15.688 WRITE DMA
ca 00 80 df e1 20 43 00 00:13:15.688 WRITE DMA
ca 00 38 d7 b7 7a 42 00 00:13:15.688 WRITE DMA
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 90% 7728 -
# 2 Short offline Completed: read failure 90% 7728 -
# 3 Extended offline Completed: read failure 90% 7728 -
# 4 Short offline Completed: read failure 90% 7728 -
# 5 Short offline Completed: read failure 90% 7727 -
# 6 Extended offline Completed: read failure 90% 7727 -
# 7 Extended offline Completed: read failure 90% 7727 -
# 8 Extended offline Completed: read failure 90% 7727 -
# 9 Short offline Completed: read failure 90% 7706 -
#10 Extended offline Completed: read failure 90% 6629 -
#11 Short offline Completed: read failure 90% 6629 -
#12 Extended offline Completed: read failure 90% 6629 -
#13 Short offline Completed without error 00% 883 -
Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Proszę o analizę, komputer się wiesza czasem resetuje, reinstalacja windows XP nie pomogła.
martctl 5.42 2011-10-20 r3458 [i686-linux-3.4.4-lesslinux-000] (local build)
Copyright (C) 2002-11 by Bruce Allen, Dostępne tylko dla zarejestrowanych użytkowników
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint P120
Device Model: SAMSUNG SP2014N
Serial Number: S088J10YB02323
Firmware Version: VC100-33
User Capacity: 200,048,565,760 bytes [200 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 4a
Local Time is: Tue Aug 14 00:34:53 2012 CEST
==> WARNING: May need -F samsung3 enabled; see manual for details.
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 4622) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 77) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 253 100 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0007 100 100 025 Pre-fail Always - 6016
4 Start_Stop_Count 0x0032 096 096 000 Old_age Always - 4728
5 Reallocated_Sector_Ct 0x0033 253 253 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0
8 Seek_Time_Performance 0x0025 253 253 015 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 7728
10 Spin_Retry_Count 0x0033 253 253 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0012 253 002 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 097 097 000 Old_age Always - 3991
190 Airflow_Temperature_Cel 0x0022 154 106 000 Old_age Always - 28
194 Temperature_Celsius 0x0022 154 106 000 Old_age Always - 28
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 413
196 Reallocated_Event_Count 0x0032 253 253 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 4
198 Offline_Uncorrectable 0x0030 253 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000a 253 100 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x000a 253 100 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 33 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 33 occurred at disk power-on lifetime: 288 hours (12 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 8f ce 63 44 Error: UNC 8 sectors at LBA = 0x0463ce8f = 73649807
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 8f ce 63 44 00 00:13:23.188 READ DMA
ca 00 08 0f 68 63 44 00 00:13:23.188 WRITE DMA
ca 00 08 47 00 5e 40 00 00:13:23.188 WRITE DMA
c8 00 01 00 00 00 40 00 00:13:23.188 READ DMA
Error 32 occurred at disk power-on lifetime: 288 hours (12 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 8f ce 63 44 Error: UNC 8 sectors at LBA = 0x0463ce8f = 73649807
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 8f ce 63 44 00 00:13:21.375 READ DMA
ca 00 08 0f 68 63 44 00 00:13:21.375 WRITE DMA
ca 00 48 ff 7d 19 44 00 00:13:21.375 WRITE DMA
ca 00 40 27 ed e2 40 00 00:13:21.375 WRITE DMA
ca 00 20 bf 67 5e 40 00 00:13:21.375 WRITE DMA
Error 31 occurred at disk power-on lifetime: 288 hours (12 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 8f ce 63 44 Error: UNC 8 sectors at LBA = 0x0463ce8f = 73649807
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 8f ce 63 44 00 00:13:19.500 READ DMA
ca 00 10 07 68 63 44 00 00:13:19.500 WRITE DMA
ca 00 40 bf 7d 19 44 00 00:13:19.500 WRITE DMA
ca 00 50 d7 e9 e2 40 00 00:13:19.500 WRITE DMA
Error 30 occurred at disk power-on lifetime: 288 hours (12 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 8f ce 63 44 Error: UNC 8 sectors at LBA = 0x0463ce8f = 73649807
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 8f ce 63 44 00 00:13:17.625 READ DMA
ca 00 28 97 7d 19 44 00 00:13:17.625 WRITE DMA
ca 00 20 77 7d 19 44 00 00:13:17.625 WRITE DMA
ca 00 20 77 7d 19 44 00 00:13:17.625 WRITE DMA
ca 00 38 3f 7d 19 44 00 00:13:17.625 WRITE DMA
Error 29 occurred at disk power-on lifetime: 288 hours (12 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 8f ce 63 44 Error: UNC 8 sectors at LBA = 0x0463ce8f = 73649807
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 8f ce 63 44 00 00:13:15.688 READ DMA
ca 00 40 a7 78 19 44 00 00:13:15.688 WRITE DMA
ca 00 80 5f e2 20 43 00 00:13:15.688 WRITE DMA
ca 00 80 df e1 20 43 00 00:13:15.688 WRITE DMA
ca 00 38 d7 b7 7a 42 00 00:13:15.688 WRITE DMA
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 90% 7728 -
# 2 Short offline Completed: read failure 90% 7728 -
# 3 Extended offline Completed: read failure 90% 7728 -
# 4 Short offline Completed: read failure 90% 7728 -
# 5 Short offline Completed: read failure 90% 7727 -
# 6 Extended offline Completed: read failure 90% 7727 -
# 7 Extended offline Completed: read failure 90% 7727 -
# 8 Extended offline Completed: read failure 90% 7727 -
# 9 Short offline Completed: read failure 90% 7706 -
#10 Extended offline Completed: read failure 90% 6629 -
#11 Short offline Completed: read failure 90% 6629 -
#12 Extended offline Completed: read failure 90% 6629 -
#13 Short offline Completed without error 00% 883 -
Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
-
migo
- Posty: 1039
- Rejestracja: 29 sty 2009, 19:11
Analiza SMART (S.M.A.R.T) dysku twardego.
HD Tune Pro: Hitachi HTS547564A9E Health
ID Current Worst ThresholdData Status
(01) Raw Read Error Rate 100 100 62 0 ok
(02) Throughput Performance 100 100 40 0 ok
(03) Spin Up Time 166 166 33 1 ok
(04) Start/Stop Count 100 100 0 1133 ok
(05) Reallocated Sector Count 100 100 5 0 ok
(07) Seek Error Rate 100 100 67 0 ok
(08) Seek Time Performance 100 100 40 0 ok
(09) Power On Hours Count 93 93 0 3479 ok
(0A) Spin Retry Count 100 100 60 0 ok
(0C) Power Cycle Count 100 100 0 1133 ok
(BF) G-sense Error Rate 100 100 0 1 ok
(C0) Unsafe Shutdown Count 100 100 0 72 ok
(C1) Load Cycle Count 99 99 0 18745 ok
(C2) Temperature 133 133 0 1048621 ok
(C4) Reallocated Event Count 100 100 0 0 ok
(C5) Current Pending Sector 100 100 0 0 ok
(C6) Offline Uncorrectable 100 100 0 0 ok
(C7) Ultra DMA CRC Error Count 200 200 0 1 warning
(DF) Load/Unload Retry Count 100 100 0 0 ok
Health Status : warning
-
cosik_ktosik
- Posty: 21416
- Rejestracja: 13 lis 2008, 01:17
- Lokalizacja: Szczecin
- Kontaktowanie:
Analiza SMART (S.M.A.R.T) dysku twardego.
(C7) Ultra DMA CRC Error Count 200 200 0 1 warning
Lekki błąd w komunikacji z dyskiem
(BF) G-sense Error Rate 100 100 0 1 ok
Uderzenie? Upadek?
(C0) Unsafe Shutdown Count 100 100 0 72 ok
Wyłączasz normalnie komputer, są jakieś zaniki prądu?
---------------------------
zgreg , jak dobrze widzę miałeś jakieś realokowane bad sektory, proponuję założyć nowy temat z opisem problemu bo raczej to nie wina dysku.
-
migo
- Posty: 1039
- Rejestracja: 29 sty 2009, 19:11
Analiza SMART (S.M.A.R.T) dysku twardego.
cosik_ktosik pisze:(C7) Ultra DMA CRC Error Count 200 200 0 1 warning
Lekki błąd w komunikacji z dyskiem(BF) G-sense Error Rate 100 100 0 1 ok
Uderzenie? Upadek?(C0) Unsafe Shutdown Count 100 100 0 72 ok
Wyłączasz normalnie komputer, są jakieś zaniki prądu?
---------------------------
zgreg , jak dobrze widzę miałeś jakieś realokowane bad sektory, proponuję założyć nowy temat z opisem problemu bo raczej to nie wina dysku.
1. Nie
2.W ostatnim czasie często nie miałem prądu a miałem włączony komputer(nie używam baterii)
PS : Mam takie pytanko: Jak oddam laptopa na gwarancje to muszę powiedzieć co jest z nim nie tak, czy oni sami do tego dojdą ? ( bo tak to bym musiał wszystko spr np. kart graf itp. itd.)
-
cosik_ktosik
- Posty: 21416
- Rejestracja: 13 lis 2008, 01:17
- Lokalizacja: Szczecin
- Kontaktowanie:
Analiza SMART (S.M.A.R.T) dysku twardego.
To nie dysk, więc nic tutaj nie będzie robione no chyba, że powiedzą chamsko upadek.
Ale co normalnie zrobią, to serię testów, zawsze je wykonują a potem próbują diagnozować
Ale co normalnie zrobią, to serię testów, zawsze je wykonują a potem próbują diagnozować
-
migo
- Posty: 1039
- Rejestracja: 29 sty 2009, 19:11
Analiza SMART (S.M.A.R.T) dysku twardego.
Czyli normalnie oddaje laptopa na gwarancje nie mówiąc co jest "popsute" ?
-
OrangeGo
- Posty: 2
- Rejestracja: 15 sie 2012, 16:10
Analiza SMART (S.M.A.R.T) dysku twardego.
HD Tune: ST3500320AS Health
ID Current Worst ThresholdData Status
(01) Raw Read Error Rate 112 82 6 47777169 Ok
(03) Spin Up Time 95 91 0 0 Ok
(04) Start/Stop Count 98 98 20 2131 Ok
(05) Reallocated Sector Count 100 100 36 1262 Ok
(07) Seek Error Rate 78 60 30 228383379 Ok
(09) Power On Hours Count 84 84 0 14382 Ok
(0A) Spin Retry Count 100 100 97 6 Ok
(0C) Power Cycle Count 98 98 20 2117 Ok
(B8) (unknown attribute) 100 100 99 0 Ok
(BB) (unknown attribute) 1 1 0 2672 Ok
(BC) (unknown attribute) 100 79 0 131222 Ok
(BD) (unknown attribute) 1 1 0 4090 Ok
(BE) Airflow Temperature 66 53 45 589365282 Ok
(C2) Temperature 34 47 0 34 Ok
(C3) Hardware ECC Recovered 43 24 0 47777169 Ok
(C5) Current Pending Sector 100 100 0 785 Ok
(C6) Offline Uncorrectable 100 100 0 785 Ok
(C7) Ultra DMA CRC Error Count 200 200 0 0 Ok
Power On Time : 14382
Health Status : Ok
Co jest z moim dyskiem nie tak ? :<
ID Current Worst ThresholdData Status
(01) Raw Read Error Rate 112 82 6 47777169 Ok
(03) Spin Up Time 95 91 0 0 Ok
(04) Start/Stop Count 98 98 20 2131 Ok
(05) Reallocated Sector Count 100 100 36 1262 Ok
(07) Seek Error Rate 78 60 30 228383379 Ok
(09) Power On Hours Count 84 84 0 14382 Ok
(0A) Spin Retry Count 100 100 97 6 Ok
(0C) Power Cycle Count 98 98 20 2117 Ok
(B8) (unknown attribute) 100 100 99 0 Ok
(BB) (unknown attribute) 1 1 0 2672 Ok
(BC) (unknown attribute) 100 79 0 131222 Ok
(BD) (unknown attribute) 1 1 0 4090 Ok
(BE) Airflow Temperature 66 53 45 589365282 Ok
(C2) Temperature 34 47 0 34 Ok
(C3) Hardware ECC Recovered 43 24 0 47777169 Ok
(C5) Current Pending Sector 100 100 0 785 Ok
(C6) Offline Uncorrectable 100 100 0 785 Ok
(C7) Ultra DMA CRC Error Count 200 200 0 0 Ok
Power On Time : 14382
Health Status : Ok
Co jest z moim dyskiem nie tak ? :<
-
janpas
- Posty: 2118
- Rejestracja: 27 mar 2009, 00:13
- Lokalizacja: ChełmicaDuża
- Kontaktowanie:
Analiza SMART (S.M.A.R.T) dysku twardego.
migo
po prostu oddajesz jest popsuty i tyle
ty nie musisz się znać co uległo awarii
OrangeGo
05) Reallocated Sector Count 100 100 36 1262 Ok
posiada badsektory dysk do wymiany się kwalifikuje
na takim raczej długo nie pociągnie komputer
prawdopodobnie system się przycina zawiesza restartuje itp.
należy go wymienić na sprawny
po prostu oddajesz jest popsuty i tyle
ty nie musisz się znać co uległo awarii
OrangeGo
05) Reallocated Sector Count 100 100 36 1262 Ok
posiada badsektory dysk do wymiany się kwalifikuje
na takim raczej długo nie pociągnie komputer
prawdopodobnie system się przycina zawiesza restartuje itp.
należy go wymienić na sprawny
Grunt to spokój
pomyśl dwa razy zanim zrobisz coś raz
Dostępne tylko dla zarejestrowanych użytkowników Szczęśliwego Nowego Roku
pomyśl dwa razy zanim zrobisz coś raz
Dostępne tylko dla zarejestrowanych użytkowników Szczęśliwego Nowego Roku
-
OrangeGo
- Posty: 2
- Rejestracja: 15 sie 2012, 16:10
Analiza SMART (S.M.A.R.T) dysku twardego.
Zgadza się zacinał się ^^ Musiałem zmniejszyć partycje C ze 100gb na 22 bo inaczej nie mogłem go sformatować i ścinał się komp 
Czyli najlepiej kupić nowy dysk i mieć z głowy ?
Jeśli tak to jaki polecacie ? ;]
Czyli najlepiej kupić nowy dysk i mieć z głowy ?
Jeśli tak to jaki polecacie ? ;]
-
cosik_ktosik
- Posty: 21416
- Rejestracja: 13 lis 2008, 01:17
- Lokalizacja: Szczecin
- Kontaktowanie:
Analiza SMART (S.M.A.R.T) dysku twardego.
Czyli najlepiej kupić nowy dysk i mieć z głowy ?
należy go wymienić na sprawny
-
Ranil
- Posty: 1
- Rejestracja: 15 sie 2012, 23:06
Analiza SMART (S.M.A.R.T) dysku twardego.
Witam!
Z racji częstych błędów crc, jak i dziwnego zachowania kompa, postanowiłem sprawdzić dysk twardy
. Liczę na pomoc ponieważ w ogóle na sprzęcie się nie znam.
HD Tune: ST3160815AS Health
ID Current Worst ThresholdData Status
(01) Raw Read Error Rate 118 90 6 173094975 Ok
(03) Spin Up Time 97 97 0 0 Ok
(04) Start/Stop Count 97 97 20 3960 Ok
(05) Reallocated Sector Count 100 100 36 0 Ok
(07) Seek Error Rate 86 60 30 421004603 Ok
(09) Power On Hours Count 85 85 0 13681 Ok
(0A) Spin Retry Count 100 100 97 0 Ok
(0C) Power Cycle Count 97 97 20 3963 Ok
(BB) (unknown attribute) 98 98 0 2 Ok
(BD) (unknown attribute) 100 100 0 0 Ok
(BE) Airflow Temperature 61 53 45 672530471 Ok
(C2) Temperature 39 47 0 39 Ok
(C3) Hardware ECC Recovered 75 61 0 229480634 Ok
(C5) Current Pending Sector 100 100 0 0 Ok
(C6) Offline Uncorrectable 100 100 0 0 Ok
(C7) Ultra DMA CRC Error Count 200 194 0 155 Ok
(C8) Write Error Rate 100 253 0 0 Ok
(CA) TA Counter Increased 100 253 0 0 Ok
Power On Time : 13681
Health Status : Ok
Pozdrawiam!
Ranil
Z racji częstych błędów crc, jak i dziwnego zachowania kompa, postanowiłem sprawdzić dysk twardy
. Liczę na pomoc ponieważ w ogóle na sprzęcie się nie znam.HD Tune: ST3160815AS Health
ID Current Worst ThresholdData Status
(01) Raw Read Error Rate 118 90 6 173094975 Ok
(03) Spin Up Time 97 97 0 0 Ok
(04) Start/Stop Count 97 97 20 3960 Ok
(05) Reallocated Sector Count 100 100 36 0 Ok
(07) Seek Error Rate 86 60 30 421004603 Ok
(09) Power On Hours Count 85 85 0 13681 Ok
(0A) Spin Retry Count 100 100 97 0 Ok
(0C) Power Cycle Count 97 97 20 3963 Ok
(BB) (unknown attribute) 98 98 0 2 Ok
(BD) (unknown attribute) 100 100 0 0 Ok
(BE) Airflow Temperature 61 53 45 672530471 Ok
(C2) Temperature 39 47 0 39 Ok
(C3) Hardware ECC Recovered 75 61 0 229480634 Ok
(C5) Current Pending Sector 100 100 0 0 Ok
(C6) Offline Uncorrectable 100 100 0 0 Ok
(C7) Ultra DMA CRC Error Count 200 194 0 155 Ok
(C8) Write Error Rate 100 253 0 0 Ok
(CA) TA Counter Increased 100 253 0 0 Ok
Power On Time : 13681
Health Status : Ok
Pozdrawiam!
Ranil
-
djkamil09061991
- Posty: 8250
- Rejestracja: 18 lut 2009, 11:54
- Lokalizacja: Wrocław
- Kontaktowanie:
Analiza SMART (S.M.A.R.T) dysku twardego.
Ranil pisze:(C7) Ultra DMA CRC Error Count 200 194 0 155 Ok
Są błędy komunikacyjne tak więc wymień kabelek łączyący dysk z płytą główną.
Co do błędów możesz też sprawdzić pamięc ram, instrukcja:
http://www.hotfix.pl/instrukcja-obslugi ... m-a204.htm
Mój kanał YouTube - Dostępne tylko dla zarejestrowanych użytkowników
Przyjmuje skiny Cs Go: Dostępne tylko dla zarejestrowanych użytkowników
Przyjmuje skiny Cs Go: Dostępne tylko dla zarejestrowanych użytkowników
-
janpas
- Posty: 2118
- Rejestracja: 27 mar 2009, 00:13
- Lokalizacja: ChełmicaDuża
- Kontaktowanie:
Analiza SMART (S.M.A.R.T) dysku twardego.
OrangeGo
samsung HD 502hj
rewelacyjny na system
i teraz jest już w przystępnej cenie
samsung HD 502hj
rewelacyjny na system
i teraz jest już w przystępnej cenie
Grunt to spokój
pomyśl dwa razy zanim zrobisz coś raz
Dostępne tylko dla zarejestrowanych użytkowników Szczęśliwego Nowego Roku
pomyśl dwa razy zanim zrobisz coś raz
Dostępne tylko dla zarejestrowanych użytkowników Szczęśliwego Nowego Roku
-
dgru
- Posty: 4
- Rejestracja: 20 sie 2012, 18:07
Analiza SMART (S.M.A.R.T) dysku twardego.
Dzień dobry wszystkim. Proszę o analizę, gdyż są problemy ze startem systemu:
HD Tune: SAMSUNG HD502HJ Health
ID Current Worst ThresholdData Status
(01) Raw Read Error Rate 100 100 51 7120 Ok
(02) Throughput Performance 252 252 0 0 Ok
(03) Spin Up Time 83 73 25 5339 Ok
(04) Start/Stop Count 100 100 0 680 Ok
(05) Reallocated Sector Count 252 252 10 0 Ok
(07) Seek Error Rate 252 252 51 0 Ok
(08) Seek Time Performance 252 252 15 0 Ok
(09) Power On Hours Count 100 100 0 2576 Ok
(0A) Spin Retry Count 252 252 51 0 Ok
(0B) Calibration Retry Count 252 252 0 0 Ok
(0C) Power Cycle Count 100 100 0 647 Ok
(BF) G-sense Error Rate 100 100 0 2 Ok
(C0) Power Off Retract Count 252 252 0 0 Ok
(C2) Temperature 64 58 0 1048608 Ok
(C3) Hardware ECC Recovered 100 100 0 0 Ok
(C4) Reallocated Event Count 252 252 0 0 Ok
(C5) Current Pending Sector 99 99 0 61 Ok
(C6) Offline Uncorrectable 252 252 0 0 Ok
(C7) Ultra DMA CRC Error Count 100 100 0 198 Ok
(C8) Write Error Rate 100 100 0 19 Ok
(DF) Load/Unload Retry Count 252 252 0 0 Ok
(E1) Load/Unload Cycle Count 100 100 0 686 Ok
Power On Time : 2576
Health Status : Ok
Z góry dziękuję!
HD Tune: SAMSUNG HD502HJ Health
ID Current Worst ThresholdData Status
(01) Raw Read Error Rate 100 100 51 7120 Ok
(02) Throughput Performance 252 252 0 0 Ok
(03) Spin Up Time 83 73 25 5339 Ok
(04) Start/Stop Count 100 100 0 680 Ok
(05) Reallocated Sector Count 252 252 10 0 Ok
(07) Seek Error Rate 252 252 51 0 Ok
(08) Seek Time Performance 252 252 15 0 Ok
(09) Power On Hours Count 100 100 0 2576 Ok
(0A) Spin Retry Count 252 252 51 0 Ok
(0B) Calibration Retry Count 252 252 0 0 Ok
(0C) Power Cycle Count 100 100 0 647 Ok
(BF) G-sense Error Rate 100 100 0 2 Ok
(C0) Power Off Retract Count 252 252 0 0 Ok
(C2) Temperature 64 58 0 1048608 Ok
(C3) Hardware ECC Recovered 100 100 0 0 Ok
(C4) Reallocated Event Count 252 252 0 0 Ok
(C5) Current Pending Sector 99 99 0 61 Ok
(C6) Offline Uncorrectable 252 252 0 0 Ok
(C7) Ultra DMA CRC Error Count 100 100 0 198 Ok
(C8) Write Error Rate 100 100 0 19 Ok
(DF) Load/Unload Retry Count 252 252 0 0 Ok
(E1) Load/Unload Cycle Count 100 100 0 686 Ok
Power On Time : 2576
Health Status : Ok
Z góry dziękuję!
-
- Reklama
Kto jest online
Użytkownicy przeglądający to forum: Obecnie na forum nie ma żadnego zarejestrowanego użytkownika i 1 gość
